Table of Contents
Advertisement
11.5 Route / Clear Route
Make sure your antenna is connected and you have a GPS
signal. To verify, look for the status indicator (green signal
face) at the bottom of the display of the GPS system.
Once you have set up your DESTINATION, you can press the
ROUTE/CLEAR ROUTE button on the GPS system. Your
route will be computed, displayed and voice prompts will guide
you automatically to your destination.
If you make an incorrect turn, or decide to take a different
route, the GPS system will announce that "YOU ARE OFF
ROUTE" two times. As you continue along that route, the GPS
system will automatically route you to your destination starting
from your actual location.
To manually compute a different route based on traffic or other
factors, first clear the current route by pressing the
ROUTE/CLEAR ROUTE button once. Press the
ROUTE/CLEAR ROUTE button a second time to compute a
new route starting from your current location.
A routing option screen will be displayed. This will allow you to
select a different routing method to get to your final destination.
Page
57
Advertisement
Table of Contents
