Table of Contents
Advertisement
Section 4 - Configuration
Local Connectivity Only allows you to set up an IPv6 connection that will not
connect to the Internet.
Advanced Settings
Click on Advanced Settings to display the below settings:
IPv6 ULA Settings
Enable ULA:
Click here to enable Unique Local IPv6 Unicast Addresses settings.
Use Default ULA
Enable this option to use the default ULA prefix.
Prefix:
If you selected Enable ULA and disabled Default ULA Prefix:
ULA Prefix:
Enter your own ULA prefix.
Current IPv6 ULA Settings
Current ULA
Displays the current ULA prefix.
Prefix:
LAN IPv6 ULA:
Displays the LAN's IPv6 ULA.
Click Save when you are done.
D-Link DIR-2680 User Manual
Local Connectivity Only
51
Advertisement
Table of Contents
