Table of Contents
Advertisement
Section 4 - Configuration
Reconnect Mode
Select either Always-on or Manual.
MTU
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
IPv6 DNS Settings
Select either Obtain DNS server address automatically or Use the
DNS Type:
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Enter the primary DNS server address.
Server:
Secondary DNS
Enter the secondary DNS server address.
Server:
LAN IPv6 Address Settings
Enable DHCP-PD:
Enable or disable prefix delegation services. This option is only
available if you selected Dynamic IP for address mode.
LAN IPv6 Link-
Displays the router's LAN link-local address.
Local Address:
If Enable DHCP-PD is disabled these additional parameters are available for configuration:
LAN IPv6 Address:
If DHCP-PD disabled or static address mode is selected, enter the LAN
(local) IPv6 address for the router.
D-Link DIR-2680 User Manual
PPPoE (continued)
46
Advertisement
Table of Contents
