Advertisement
PICTURE
AUDIO
OPTIONS
ENTER
MENU TO EXIT
AUDIO MODE:
STEREO
SPK MODE:
LAST
ENTER
MENU TO EXIT
By selecting AUDIO, you can change settings that configure the tuner and
initial speaker selection of your Auto Video system.
AUDIO MODE - configures the tuner to receive STEREO or SAP (second
audio program) broadcasts. This setting effects all channels.
NOTE: Configuring your system to SAP will effect ALL TV channels. If any
of these channels do not broadcast audio using SAP, audio will not be present.
In this mode, SAP will be displayed with the channel number on the screen.
SPK MODE (speaker mode) allows your to configure your
system to initialize with your individual preference of audio modes.
LAST - System audio will be configured in the same mode as the system was
previously operating. This setting allows audio through the factory sound
system or headphones, whichever was LAST set.
ON - Sets the audio to play through the factory sound system every time the
Auto Video
system is turned on. (Tune to either 88.7 or 89.1 FM,
depending on how your installer configured your system.)
OFF - This selection will cause the audio to be heard only through the
headphones when Auto Video system is turned on.
* To change the audio mode after the Auto Video system has been turned on,
press
the SPEAKER button located on the side of the display screen or press the
AUDIO button on the remote control.
Auto Video
Advertisement
