Operating The Monitor; Open/Close/Power On The Display Monitor; Signal Source On / Off ( ); Function Mode (Menu) - Rosen RE9269D Instructions Manual

5. OPERATING THE MONITOR:

5.1 OPEN/CLOSE/POWER ON THE DISPLAY MONITOR

To open/close the display monitor, push & pull the "OPEN/CLOSE" button to the
desired position.
5.2 SIGNAL SOURCE (MODE)
Press remote (MODE) button or "VIDEO Select Source" (
input signal AV1, AV2 or DVD.

5.3 FUNCTION MODE (MENU)

Press remote "VIDEO MENU" button or monior "MENU" (
the screen set up sequence as follows:
COLOR ¡÷ BRIGHT ¡÷ TINT ¡÷ DIMMER ¡÷ FORMA T
RESET
COLOR: Color adjustment
BRIGHT: Brightness setting
TINT: Adjustment to color saturation
DIMMER: ON/OFF
FORMAT: Format Selection
RESET: Reset COLOR, BRIGHTNESS, and TINT to factory settings.
Once the desired setting is selected, press the cursor key to the desired setting. If a
key is not activated within 5 seconds, this function mode will turn off.
Once the correct function is selected, press the cursor key i.e. or to the desired
setting. If no key is depressed, this function mode will turn OFF in about 5 seconds.
5.4 DOOR LIGHT ON/OFF (
Engage this switch to have the door open switch activate the dome lights.
Note: This function can be operational only when the Gray wire of the dome light
assembly is connected to the door switch.
5.5 COURTESY LIGHT ON/OFF (
Activate this switch to "ON/OFF" to activate the dome light.
) button to select the
) button to activate
)
)
10
6. BASIC FUNCTIONS:

6.1 DVD playback (DVD)

(1)Select video source (DVD).
(2)Load a disc into the unit.
(3)DVD playback commences.
The disc will start to play if the disc does not have any menu recorded on it.
If the disc has one or more titles recorded on it, a menu screen will appear on the
TV monitor.
(4) Press / / / to select the preferred title.
(5) Press the "ENTER" button, the selected item will now
start playing.
(6) Return to the menu screen.
Press the DVD "MENU" button, the menu screen will appear.
After operation, press "POWER" (
Note:
When "WRONG REGION" appears, it means that the corresponding operation is
prohibited either by the player or by the disc.

6.2 Audio CD playback (CD)

(1) Press the remote control's "POWER" (
button to switch on the unit's power.
(2) Insert a disc into the unit.
(3) Press "PLAY/PAUSE" ( ) button to start the playback of the disc.

6.3.1 Fast forward or reverse (DVD/MP3/CD)

(1) Press the "FF" ( ) button during playback.
Each time this button is pressed, the unit will go into a rapid advance playback
mode.The OSD will be shown on the TV screen, depending on the speed of the
playback selected.
CD playback
FF 1X FF 2X FF 3X
Press "PLAY" button, the speedwill go back to standard.
MP3/DVD playback
FF 2X FF 4X FF 6X
Press "PLAY" button, the speedwill go back to standard.
(2) Press the FR ( ) button during playback.
Each time this button is pressed, the unit will go into a rapid reverse playback
mode.The OSD will be shown on the TV screen, depending on the speed of the
playback selected.
CD playback
FR 1X FR 2X FR 3X
Press PLAY button, the speedwill go back to standard.
TITLE MENU
1.Fish
2.Bird
3.Dog
) button to put the unit into standby mode.
) button or the monitor "POWER" (
FF 4X PLAY
FF 8X PLAY
FR 4X PLAY
11
)