Operation; Tune On The Power; Starting The Air Supply - JUKI PS900SB13090CKZ Instruction Manual

5. OPERATION

5-1. Tune ON the power

❶
Fig. 1

5-2. Starting the air supply

1) Insert the power cord plug into the socket
(supply voltage: 220 V ± 20 %, 50 Hz). Be
sure to ground the power cord for the sake
of safety.
2) Among the power switches (air switches) in
the control panel cabinet, the switch that is
located at the left side of the control panel
and has the identical-color upper and lower
cords (red and red, and black and black) is
the laser power supply switch ❶ . (See Fig.
❷
1.) Another air switch that is located at the
upper right corner in the control panel and
has different-color upper and lower cords
(red and brown, and blue and black) is the
sewing machine power supply air switch ❷ .
(See Fig. 2.)
Fig. 2
Put the compressed air from the air source (air
pressure: 0.5 - 0.55 MPa) to the air supply suction
inlet 64 by means of the air tube (specification: 8
× 5 mm).
– 18 –