Ariens Sno-Thro ST5520E Owner's/Operator's Manual page 9

1
1. Mounting
Hardware
2. Discharge
Chute
Install Discharge Chute Crank
1. If necessary, position the crank support
bracket as shown in Figure 6.
2. Slide chute crank through crank support
bracket.
3. Connect the chute crank to the pinion
gear on chute with spring clip.
4. Align the chute crank and chute crank
support bracket with the pinion gear so
crank rotates freely.
5. Tighten the crank support bracket to the
lower handlebar as shown in Figure 6.
1
2
3. Discharge
Chute Ring
4. Chute
Pedestal
Figure 5
1
3
4
OS7050
OS7055
GB - 9
2 in. (5.08 cm)
2
1. Chute Crank
2. Crank Support Bracket
3. Pinion Gear
4. Spring Clip
Figure 6
3
4
OS7065
OS0001