Daikin ETVZ16S23DA6V User Reference Manual page 57

ETVZ16S18+23DA6V+9W
Daikin Altherma 3 H HT F
4P586461-1A – 2020.01
c Smartphone + app
Configuration
To configure the Daikin Residential Controller app, follow the in-app instructions.
While doing this, the following actions and information are needed on the user
interface of the indoor unit:
D
User profile
Operation
Wireless gateway
Malfunctioning
Room
[D.1] Mode: Turn AP mode ON (= WLAN adapter active as access point):
1 Go to [D.1]: Wireless gateway > Mode.
2 In the Enable AP mode screen, select Yes.
[D.2] WPS: Connect the WLAN adapter to the router:
1 Go to [D.2]: Wireless gateway > WPS.
2 In the Connect to home network screen, select OK.
[D.3] Reset: Reset the WLAN adapter:
1 Go to [D.3]: Wireless gateway > Reset.
2 In the Reset the gateway screen, select OK.
[D.4] Device info: Consult information about the WLAN adapter:
1 Go to [D.4]: Wireless gateway > Device info.
2 Read out SSID, MAC address, and Serial number.
The Daikin Residential Controller app needs to be
installed on the user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
[D] Wireless gateway
[D.1] Mode
[D.2] WPS
[D.3] Reset
[D.4] Device info
4 Operation
|
User reference guide
57