Table of Contents
Advertisement
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
Press the
symbol several times until the
0
1.
up.
lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Sound signals
™ƒ
Confirmation beep and error signal deactivated.
‹
Only confirmation beep deactivated.
‚
All signals activated.*
ƒ
Automatic timer
™†
Switched off.*
‹
-
Automatic shut-off time
‚
ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
30 seconds.
ƒ
1 minute.
„
™ˆ
Power-Management function
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
= 1,500 W.
‚
= 2,000 W.
ƒ
etc.
or
. = maximum power of the hob.
Š
Š
Hotplate time selection
™Š
‹
Unlimited: the last hotplate programmed remains selected.*
Limited: The hotplate will only remain selected for 10 seconds.
‚
Return to basic settings
™‹
‹
Personal settings.*
‚
Return to factory settings.
*Factory settings
10
Once the time has elapsed
A warning beep sounds. In the time program function display
‹‹
the indicators turn off.
Pressing the
beep.
indicator lights
W
Changing or cancelling the time
Press the
up. Change the cooking time in the programming panel, or set
to
‹‹
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and
selected power level (from 1 to 10 hours).
"
‰
is shown, and the
indicator comes on. After 10 seconds
W
symbol turns off the indicators and stops the
0
symbol several times until the
0
.
indicator lights
W
Advertisement
Table of Contents
