The Timer; Automatic Time Limitation; Cleaning Lock Function; Basic Settings - Siemens EH9 MD Series Instruction Manual

Changing or cancelling the time
Select the hotplate and then press the
Change the cooking time using the programming zone or set
to in order to cancel the time.
‹‹
Automatically switch off a hotplate with the deep-frying
function
When cooking using the deep-frying function, the programmed
cooking time begins to count down once the selected zone
reaches the desired temperature.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up
When the 0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Cleaning lock function

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the symbol. A signal sounds. The control panel is
#

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
Childproof lock
™‚
Deactivated.*
‹
Activated.
‚
Audible signals
™ƒ
Confirmation and error signals deactivated.
‹
‚ Only confirmation signal deactivated.
ƒ All signals activated.*
Automatic programming of cooking time
™†
Switched off.*
‹
- Automatic shut-off time.
‚ ŠŠ
*Factory settings
12
symbol.
0
for 10 seconds in the display.
‹‹
"

The timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
Programming
Press the
0
1.
up. lights up in the time program function display.
‹‹
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0
up. Change the time with the programming zone, or set to
Once the time has elapsed
A warning signal sounds. In the time program function
display is shown, and the
‹‹
10 seconds the indicators turn off.
When the
0
beeping stops.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and ‰ selected power level (from 1 to 10 hours).
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
symbol several times until the
symbol several times until the
indicator lights up. After
W
symbol is pressed, the indicators turn off and the
indicator lights
W
indicator lights
W
.
‹‹