Siemens EH3..ME1.. Instruction Manual

Hide thumbs Also See for EH3..ME1..:

Advertisement

Quick Links

EH3..ME1..
[en] Instruction manual .............................................................. 2
9000308580
*9000308580*

Advertisement

Table of Contents
loading

Summary of Contents for Siemens EH3..ME1..

  • Page 1 EH3..ME1.. [en] Instruction manual .............. 2 9000308580 *9000308580*...
  • Page 2: Table Of Contents

    Setting the hotplate ................6 Normal noise while the appliance is working ......11 Cooking guidelines................6 After-sales service ..............11 Produktinfo Additional information on products, accessories, replacement parts and services can be found at www.siemens-home.com and in the online shop www.siemens-eshop.com Ø = cm...
  • Page 3: Safety Warnings And Advice

    ã=Safety warnings and advice Please read these instructions carefully. We advise you not to The hotplate heats up, but the display does not work use the appliance until you have read them. Risk of burns!! Keep the operation and installation instructions. If the appliance Turn off the hotplate if the indicator does not work.
  • Page 4: Protecting The Environment

    Overview The following table presents the most common damage caused: Damage Cause Measure Stains Food spillage Immediately remove spilt food using a glass scraper. Unsuitable cleaning products Only use cleaning products specifically designed for glass-ceramic hobs. Scratches Salt, sugar and sand Do not use the hob as a tray or working surface.
  • Page 5: Familiarise Yourself With The Appliance

    pan and switch the hotplate off. If it fails to work after it has Absence of pan or unsuitable size cooled down, please contact the Technical Assistance Service. If no pan is placed on the selected hotplate, or if it is made of unsuitable material or is not the correct size, the power level Pan detection displayed on the hotplate indicator will flash.
  • Page 6: Programming The Hob

    Programming the hob This section will show you how to program the hotplates. The Selecting the power level table contains power levels and cooking times for several The hob must be switched on. dishes. Press the ¤ symbol of the desired hotplate. The ‹...
  • Page 7 Ongoing cooking Ongoing cooking time setting in minutes Boiling, steaming, roasting Rice (with a double amount of water) 15-30 min Rice pudding 25-35 min Unpeeled potatoes 25-30 min Peeled potatoes with salt 15-25 min Pasta 6 -7* 6-10 min Soups 3­-4 15-60 min Vegetables...
  • Page 8: The Powerboost Function

    The Powerboost Function To activate The Powerboost function can be used to heat food more quickly than using the power level Š Select the power level Š Press the programming panel located above the symbol. @› Use limitations The function has been activated. This function is available on all hotplates, provided that no other To turn off hotplate in the same group is operating, (see diagram).
  • Page 9: The Timer

    The timer Once the time has elapsed A warning beep sounds. In the time program function display The timer can be set for periods of up to 99 minutes. It is is shown, and the indicator comes on. After 10 seconds ‹‹...
  • Page 10: To Access The Basic Settings

    To access the basic settings Press the symbol several times until the indicator for the desired function appears on the left of the screen. The hob must be turned off. Then select the desired setting in the programming panel. Turn on the hob with the main switch. Within the next 10 seconds, press the symbol and hold for 4 seconds.
  • Page 11: Normal Noise While The Appliance Is Working

    Indicator Malfunction Measure The control panel is wet or an object is Dry the control panel area or remove the object. flashing “ resting on it. Electronic system malfunction. Disconnect the hob from the mains. Wait 30 seconds or so, then + number / “§...
  • Page 12 Siemens-Electrogeräte GmbH Carl-Wery-Straße 34 81739 München (901015) DEUTSCHLAND...

Table of Contents