Battery - Kidde K10SCO User Manual

12. Battery

This alarm is powered by 2 AA batteries. Under normal operating conditions, the batteries will last a minimum of one year.
NOTE: Constant exposures to extreme temperatures and humidities may affect battery life.
wARNING: do Not AtteMPt to oPeN the AlARM foR ANy ReAsoN! do Not tRy to
RePAIR the AlARM yoURself.
Alarm Removal
If the tamper-resist feature has been activated, refer to tamper-resist feature description on page 17 for removal
instructions.
battery Installation and Removal
A: To replace or install the batteries slide the battery door in the direction indicated on the cover
of the alarm.
B: Pull the yellow tab to remove the batteries.
C: When installing a new battery into the battery compartment make sure that the polarity matches the
markings printed on the inside of the battery compartment. Insert battery under plastic bar as
shown below and push down carefully.
Slide
A missing or improperly installed battery will prevent the battery door from closing and result in improper
alarm operation.
Replace battery with one of the following approved brands:
Gold Peak 15A; Golden Power GLR6A; Energizer E91
wARNING! Use only the batteries specified. Use of different batteries may have a detrimental effect
on the Smoke/CO alarm.
NOTE: Do not use lithium battery in this unit.
20
Remove
Figure 12-A
Insert