Kidde K10SCO User Manual page 17

wARNING: fAIlURe to PRoPeRly INstAll ANd ACtIvAte thIs AlARM wIll PReveNt
PRoPeR oPeRAtIoN of thIs AlARM ANd wIll PReveNt Its ResPoNse to fIRe hAZARds.
Smoke alarms are not to be used with detector guards unless the combination (alarm and detector guard) has
been evaluated and found suitable for that purpose.
Smoke Alarm Tamper Resist Feature
Tamper-Resist features have been provided. To activate the mounting bracket Tamper-Resist feature break off
the four posts in the square holes in the trim ring (see figure 9-E). When the posts are broken off, the
Tamper-Resist tab on the base is allowed to engage the mounting bracket. Rotate the alarm onto the mount-
ing bracket until you hear the Tamper-Resist tab snap into place, locking the alarm on the mounting bracket.
Using the Tamper-Resist feature will help deter children and others from removing the alarm from bracket.
NOTE: To remove the alarm when the Tamper-Resist tab is engaged, press down on the Tamper-Resist tab,
and rotate the alarm off of the bracket (see figure 9-F).
POSTS
Figure 9-E
Figure 9-F
17