Summary of Contents for Agilent Technologies 16200A
Page 1
Agilent 16200A External DC Bias Adapter Operation and Service Manual Agilent Part No. 16200-90000 Printed in JAPAN January 2000 Second Edition...
Page 2
Notice Warranty Limitation of Warranty No other warranty is expressed or implied. Agilent Technologies specically disclaims the implied warranties of merchantability and tness for a particular purpose. Certication...
Page 3
Exclusive Remedies The remedies provided herein are the buyer's sole and exclusive remedies. Agilent Technologies shall not be liable for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort, or any other legal theory. Assistance...
Page 5
Safety Summary WARNINGS The Agilent Technologies assumes no liability for the customer's failure to comply with these requirements. DO NOT Operate In An Explosive Atmosphere DO NOT Service Or Adjust Alone DO NOT Substitute Parts Or Modify Instrument Dangerous Procedure Warnings...
Page 15
Preparation for Use Introduction Initial Inspection Preparation for Use...
Page 16
Figure 2-1. Product Overview Preparation for Use...
Page 17
Table 2-1. Contents Description Agilent Part Number Quantity Environmental Considerations Operating and Storage Instruction for Cleaning Fuse Preparation for Use...
Page 18
Connecting the Adapter for Use Caution Figure 2-2. Connecting the Adapter DC Source Input V Monitor Preparation for Use...
Page 19
Repacking the Adapter FRAGILE Preparation for Use...
Page 21
Operation Introduction Calibration Connecting the 16200A LOAD, SHORT and OPEN Compensation Operation...
Page 23
SHORT Fixture Compensation SHORT Compensation Key Sequence NNNNNNNNNNNNNNNNN SHORT NNNNNNNNNNNNNNNNN SHORT OPEN Fixture Compensation OPEN Compensation Key Sequence NNNNNNNNNNNNNN OPEN NNNNNNNNNNNNNN OPEN Completing the Compensation Procedure NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN DONE COMPEN Caution Operation...
Page 24
Evaluating the DUT Caution Caution Note DC Bias You Can NOT Use the Internal DC BIAS Source of Your Instrument Requirement for External Current Source Current Limiting Resisitor Operation...