Related Manuals for Agilent Technologies 85130F
Summary of Contents for Agilent Technologies 85130F
- Page 1 Operating and Service Manual Agilent Technologies 85130F NMD 2.4 mm to 3.5 mm Adapter Kit Part Number 85130-90030 Printed in USA May 1988 © Copyright 1988 Agilent Technologies...
-
Page 2: Limitation Of Warranty
WARRANTY This Hewlett-Packard instrument product is warranted against defects in material and workmanship for a period of one year from date of delivery. During the warranty period, Hewlett-Packard Company will, at its option, either repair or replace products which prove to be defective. For warranty service or repair, this product must be returned to a service facility designated by HP. - Page 3 Notice Hewlett-Packard to Agilent Technologies Transition This documentation supports a product that previously shipped under the Hewlett- Packard company brand name. The brand name has now been changed to Agilent Technologies. The two products are functionally identical, only our name has changed. The document still includes references to Hewlett-Packard products, some of which have been transitioned to Agilent Technologies.
- Page 5 For more information, refer to the Microwave Connector Care manual. The HP 85130F adapter kit consists of two NMD-2.4 mm to 3.5 mm adapters and a spanner wrench. The test set end of the adapters has a NMD-2.4 mm connector while the Device Under Test (DUT) end has a precision connector.
-
Page 6: Specifications
+ 0.00254 to + 0.0127 NMD-3.5 mm male + 0.00254 to + 0.0127 ELECTRICAL Adapter Frequency Range Return Loss DC to 8 GHz NMD-2.4 mm to PSC-3.5 female NMD-2.4 mm to NMD-3.5 mm male 18 GHz to 26.5 HP 85130F... - Page 7 Using an HP 8510 Network Analyzer perform the following test on your adapters as soon as you receive them, and periodically repeat the test to determine if their performance meets the electrical specifications stated above or if they need to be replaced. An initial period of one year between performance tests is recommended.
- Page 8 R E F - 5 . 0 mUnits 4.007 mUni ts/ Adapter End Load End Airline of Airline Start Gate START -50.0 ps STOP 1.0 ns Figure 2. Location of Gates and Airline HP 85130F NMD-2.4 mm to 3.5 mm Adapter Kit...
- Page 9 The following equipment and supplies are required for the maintenance and use of, but are not supplied with, your HP 85130F adapter kit. 3.5 mm gage kit ........85052-80010 (part of the HP 85052A/B calibration kits) Torque wrench, 20 mm, 96 N-cm (8 in-lb) .