Camera Display - Sony XAV-9000ES Manual

Hide thumbs Also See for XAV-9000ES:

Table of Contents

Help Guide

In-Car Receiver

XAV-9000ES

Application

Camera Display

Selects a camera view mode: [Normal], [Flipped].

[Rear Camera Guideline Adjust] displays the rear camera guidelines.

[Rear Camera Interruption] displays the video of the rear view camera connected to the REAR CAMERA IN cable when

you put the gear shift in R (reverse).

[Camera 1 Interruption] automatically displays the video of the camera connected to the CAMERA IN 1 cable when the

interruption signal is detected from the EXT IN 1 lead.

[Camera 2 Interruption] automatically displays the video of the camera connected to the CAMERA IN 2 cable when the

interruption signal is detected from the EXT IN 2 lead.

Notes on connecting the iDataLink Maestro module (not supplied) (XAV-9000ES(UC))

When connecting the iDataLink Maestro module (not supplied) and you are using the interruption function from the

module, [Rear Camera Interruption] is available. The Camera 1/Camera 2 interruption functions are set on [Maestro

Settings] of [Application] in [Settings].

When connecting the iDataLink Maestro module (not supplied) and you are using the Backup Camera Dynamic

Guidelines function, adjust the guideline.

A. 2.0 m (6 1/2 feet) behind the car

B. 0.5 m (1 3/4 feet) behind the car

SXM Reset (XAV-9000ES(UC))

Initializes the SiriusXM Connect Vehicle Tuner settings: [Reset], [Cancel].

Maestro Input Level (XAV-9000ES(UC))

Adjusts the relative volume level to the signal input from the iDataLink Maestro module: –8 to +8.

(Available only when the connection with iDataLink Maestro is established.)

Maestro Settings (XAV-9000ES(UC))

Displays the menus for your original car settings and setting for the iDataLink Maestro module. Your display will vary

based on the firmware in the iDataLink Maestro module.

(Available only when the connection with iDataLink Maestro is established.)

Table of Contents