Camera Display - Sony XAV-AX4000 Help Manual

Help Guide
In-Car Receiver
XAV-AX4000
Application

Camera Display

[Rear Camera View] selects a camera view mode: [Normal], [Flipped].
[Rear Camera Interruption] displays the video of the rear view camera connected to the REAR CAMERA IN cable when
you put the gear shift in R (reverse).
[Rear Camera Guideline Adjust] displays the rear camera guidelines.
SXM Reset (XAV-AX4000(UC))
Initializes the SiriusXM Connect Vehicle Tuner settings (preset channels/parental lock): [Reset], [Cancel].
Maestro Input Level (XAV-AX4000(UC))
Adjusts the relative volume level to the signal input from the iDataLink Maestro module: –8 to +8.
(Available only when the connection with iDataLink Maestro is established.)
Maestro Settings (XAV-AX4000(UC))
Displays the menus for your original car settings and setting for the iDataLink Maestro module. Your display will vary
based on the firmware in the iDataLink Maestro module.
(Available only when the connection with iDataLink Maestro is established.)
Radio Tuning Steps (XAV-AX4000(E)/XAV-AX4000(E17)/XAV-AX4000(IN))
Sets the FM/AM tuning step of your country or region.
Related Topic
Basic Setting Operation
5-035-405-11(1) Copyright 2022 Sony Corporation
54