Roland VS8F-3 Owner's Manual page 24

Effect Algorithm
L-ch DELAY
Parameter (full name)
INI.DLY (Initial delay time)
INI.D.PAN (Initial delay pan)
D.TIME (Delay time)
MOD DEPTH (Modulation depth)
FB (Feedback level)
X-FB (Cross feedback level)
LF DAMP GAIN
LF DAMP FREQ
HF DAMP GAIN
HF DAMP FREQ
R-ch DELAY
Parameter (full name)
INI.DLY (Initial delay time)
INI.D.PAN (Initial delay pan)
D.TIME (Delay time)
MOD DEPTH (Modulation depth)
FB (Feedback level)
X-FB (Cross feedback level)
LF DAMP GAIN
LF DAMP FREQ
HF DAMP GAIN
HF DAMP FREQ
LINK (Channel link switch)
Initial Delay Time (INI.DLY) and Initial Delay Panpot (INI.D.PAN) are not linked.
(*3)
MODULATION
Parameter (full name)
W.F (Wave form)
CYCLE
PHASE L-R
OUTPUT
Parameter (full name)
L/R BAL (L/R balance)
WET LEVEL
DRY LEVEL
24
Setting Function
1/1, 1/1t, 1/2, 1/2t, 1/4,
Specifies the initial delay time of the L-channel in terms of a note length (*3, *4)
1/4t, 1/8, 1/8t, 1/16, 1/16t,
With the 0.0 setting, there will be no initial delay. Settings of 0.0~1000 produce a
1/32, 1/32t, 1/64, 1/64t,
fixed delay of the specified time that is not affected by the tempo.
0.0~1000 ms
Specifies the volume balance at which the L-channel initial delay sound will be
L63~C~R63
sent to the L/R stereo delays.
1/1, 1/1t, 1/2, 1/2t, 1/4,
Specifies the delay time for left-side delay in terms of a note value (*3, *4)
1/4t, 1/8, 1/8t, 1/16, 1/16t,
Settings of 0~1000 produce a fixed delay of the specified time that is not affected
1/32, 1/32t, 1/64, 1/64t,
by the tempo.
0~1000 ms
Specifies the amount by which MODULATION will vary the delay time of
0~100
left-side delay.
-100~0~100 Sets the amount of the left-side delay that will be returned to the left delay input.
-100~0~100 Sets the amount of the left-side delay that will be returned to the right delay input.
Sets the amount of the left-side attenuation in the Low frequency band for the de-
-36.0~0.0 dB
lay sound fed back.
Sets the frequency at which the left-side attenuation in the Low frequency band
20~2000 Hz
starts to the fed back delay sound.
Sets the amount of the left-side attenuation in the High frequency band for the
-36.0~0.0 dB
delay sound fed back.
Sets the frequency at which the left-side attenuation in the High frequency band
200~20000 Hz
starts to the fed back delay sound.
Setting Function
1/1, 1/1t, 1/2, 1/2t, 1/4,
Specifies the initial delay time of the R-channel in terms of a note length (*3, *4)
1/4t, 1/8, 1/8t, 1/16, 1/16t,
With the THRU setting, there will be no initial delay. Settings of 0~1000 produce
1/32, 1/32t, 1/64, 1/64t,
a fixed delay of the specified time that is not affected by the tempo.
0.0~1000 ms
Specifies the volume balance at which the R-channel initial delay sound will be
L63~C~R63
sent to the L/R stereo delays.
1/1, 1/1t, 1/2, 1/2t, 1/4,
Specifies the delay time for right-side delay in terms of a note value (*3, *4)
1/4t, 1/8, 1/8t, 1/16, 1/16t,
Settings of 0~1000 produce a fixed delay of the specified time that is not affected
1/32, 1/32t, 1/64, 1/64t,
by the tempo.
0.0~1000 ms
Specifies the amount by which MODULATION will vary the delay time of
0~100
right-side delay.
-100~0~100 Sets the amount of the right-side delay should be returned to the right delay input.
-100~0~100 Sets the amount of the right-side delay should be returned to the left delay input.
Sets the amount of the right-side attenuation in the Low frequency band for the
-36.0~0.0 dB
delay sound fed back.
Sets the frequency at which the right-side attenuation in the Low frequency band
20~2000 Hz
starts to the fed back delay sound.
Sets the amount of the right-side attenuation in the High frequency band for the
-36.0~0.0 dB
delay sound fed back.
Sets the frequency at which the right-side attenuation in the High frequency band
200~20000 Hz
starts to the fed back delay sound.
OFF, ON (*1) Specifies if channel R follows or does not follow the settings for channel L.
Setting Function
SINE, SQURE, +EXP, -EXP Specifies the waveform that will modulate the delay time of the stereo delays
1/1, 1/1t, 1/2, 1/2t, 1/4,
1/4t, 1/8, 1/8t, 1/16, 1/16t, Specifies the frequency (cycle) at which the delay time of the stereo delays will be
1/32, 1/32t, 1/64, 1/64t, modulated, in terms of a note value (*4)
0.0~10.0 Hz (*4)
Specifies the L/R phase difference for the waveform that will modulate the stereo
-180 degree ~180 degree
delays
Setting Function
L63~C~R63 Sets the volume balance between the left-side sound and the right-side sound.
-∞, -80.0~6.0 dB Sets the volume of the delay sound.
-∞, -80.0~6.0 dB Sets the volume of the direct sound.