Connecting The Tascam Da Series - Roland VM-7100 Owner's Manual

Connecting the TASCAM DA Series

fig.5-09e
DIGITAL I/O
TDIF-1
TASCAM DA series
1 Use the R-BUS cable included with the DIF-AT to connect the DIF-AT and
the processor.
2 Use a cable for use with TASCAM devices (sold separately) to connect the
TASCAM DA Series and the DIF-AT.
3 Press the Mixing Processor (VM-7200, VM-7100) POWER switch to turn on
the power. Confirm that the DIF-AT's POWER indicator is lit.
REMOTE IN /
SYNC IN
DIF-AT
Processor (VM-7200)
Various Connection Setups
R-BUS(RMDB2)
31