Problems Common To Software In General - Roland UA-30 Getting Started

Problems common to software in
general
Can't install
• Is the included CD-ROM inserted into the CD-ROM drive of your
computer?
Make sure that it is.
• During installation, were the CD-ROM drive name and the installation
file name input correctly?
• Is there sufficient space on your hard disk?
Increase the free space on your hard disk. Delete unneeded files (move them
to the Recycle Bin), and then right-click on the Recycle Bin and select Empty
Recycle Bin.
Alternatively, you can add another hard disk to your system.
• Were other applications running when you performed the installation?
Exit all applications, and perform the installation again.
Can't start up an application
• Are numerous applications running?
It may be that there is not enough memory to start up another application.
Close all unneeded applications, and then start up the new application. If an
error is still displayed, try restarting Windows.
An error is displayed when you start up an
application
If multiple applications are started up simultaneously, an error message may
appear. If this occurs, click [OK], and close all unnecessary applications.
Even if an application window has been closed, the application is still
running if it remains in the taskbar. Be sure to close any unnecessary
application that appears in the taskbar.
The volume level of the instrument connected to
LINE IN is too low.
• Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
• Is the Line Input adjustment slider (p. 11 ) raised appropriately?
16
Troubleshooting
For details on installing a
hard disk, refer to the
owner's manuals for your
computer and for
Windows.
49