Ua-30 Application Guide; Digitally Recording The Output Of The Ua-30 On Md Or Dat - Roland UA-30 Getting Started

UA-30 Application Guide

This chapter explains various ways in which the UA-30 can be connected and used.
Digitally recording the output of the
UA-30 on MD or DAT
Make the connections shown in the following diagram.
fig.03-01.e
Monitor speakers
LINE IN
You must set this to match
the sample rate of the device
(MD/DAT) connected to
the digital output.
* Audio data of a sampling rate identical to the setting of the "Sample rate select
switch" will be recorded with no loss of quality. Audio data of a sampling rate other
than the setting of the "Sample rate select switch" will be automatically
converted within Windows 98 to the rate specified by the "Sample rate select
switch", and will be output from the digital output connectors of the UA-30.
MD / DAT
DIGITAL INPUT
Optical digital cable
Audio cable
OPTICAL
LINE
OUT
OUT
UA-30
Computer
Provide separately as
suitable for your equipment.
When using a coaxial cable
to make connections, connect
it to the UA-30's
"COAXIAL OUT" connector.
USB cable
USB
port
Stereo
Headphones
Signal flow
Depending on the
application that you are
using, when the digital
output of the UA-30 is
connected to a digital
device such as MD or DAT
and audio is playing, a
USB
port
certain amount of time may
be required immediately
after playback ends for the
digital audio output to be
locked, so that there will be
no sound for one or two
second, or the tempo or
pitch may be wrong. If this
occurs, you can use the
"UA-30 D-Out Smoother"
software included in the
CD-ROM to make the
audio sound smoothly. For
details refer to "Basic
operation of the UA-30
D-Out Smoother" (p. 37).
If you change the position
of the Sample rate select
switch or the Recording
input select switch, you
must first exit all
applications including the
UA-30 D-Out Smoother
(p. 37). You should also
turn down the volume of
any audio amp system
that is connected.
The signal that is input to
the digital input connector
of the UA-30 will not be
directly output from its
digital output connector.
21