Boss V-Wah PW-10 Owner's Manual page 32

Resetting the Pedal Sensitivity (PEDAL CALIBRATION Mode)
6. With the toe of the pedal completely
depressed, press and then release the
MANUAL/MEMORY button.
The MEMORY indicator lights up red
when the pedal position is acknowl-
edged.
fig.12
* If the pedal is not positioned correctly, the
MEMORY indicator blinks red. Reposition
the pedal correctly, then carry out the
procedure again.
* If the MEMORY indicator blinks even when
the pedal position is correct, it may indicate a
problem with the device.
32
7. With the pedal all the way back, press
and then release the MANUAL/MEM-
ORY button.
The MEMORY indicator lights up green
when the pedal position is acknowl-
edged.
fig.13
* If the pedal is not positioned correctly, the
MEMORY indicator blinks green.
Reposition the pedal correctly, then carry out
the procedure again from Step 4.
* If the MEMORY indicator blinks even when
the pedal position is correct, it may indicate a
problem with the device.