Changing The Operation Of The Heel Switch - Boss V-Wah PW-10 Owner's Manual

Changing the Operation of the Heel Switch

You can select either of two ways (A and B) to switch between "MANUAL" and "MEMORY
1–3" when the rear switch is pressed.
A. Each time the heel switch is pressed,
the unit switches to "MANUAL" and
then through "MEMORY (1–3)" in order
(factory setting).
This setting is convenient when you
want to switch among a variety of differ-
ent effects.
fig.10
Manual
(Off)
Memory 3
(Yellow)
20
Memory 1
(Red)
Memory 2
(Green)
B. Each time the heel switch is pressed,
the unit toggles between "MANUAL"
and only the one memory.
This setting is convenient when you want
quick toggling between two effects.
Select the memory you want to call up
with the MANUAL/MEMORY button.
* Memory 1 is selected when the power is
switched on.
fig.11
Manual
(Off)
Memory
(Lit)