Table of Contents
Advertisement
Battery
Description
Battery, 4 cell, 70 Wh, 4.55 Ah
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
To remove the battery:
1.
Remove the four Phillips PM2.0×5.0 screws (1) that secure the battery to the computer.
2.
Pull the battery away from the system board connector, and then up and out of the computer (2).
Reverse this procedure to install the battery.
Bottom cover on page
31).
Spare part number
920070-855
Component replacement procedures
33
Advertisement
Table of Contents
