Table of Contents
Advertisement
Bottom cover
Description
Bottom cover – natural silver
Bottom cover – Dixons
Rubber Kit
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
To remove the bottom cover:
1.
Position the computer upside down with the front toward you.
2.
Remove the upper rubber feet (1) so you can access the screws underneath.
3.
Remove the two Phillips PM2.5×6.0 screws (2) that were under the upper rubber feet.
4.
Remove the three remaining Phillips PM2.0×5.0 screws (3).
Battery on page
33).
Spare part number
927911-001
938609-001
926855-001
Component replacement procedures
31
Advertisement
Table of Contents
