Attaching The Pickup Controller Unit; Holders - Roland GK-2A Owner's Manual

INSTALLATION

1. Attaching the Pickup Controller Unit

Attaching the Pickup Controller Unit with Holders
1. Remove two screws from the controller,
then attach those screws to Holder "A."
fig.10-1
Holder A
2. Loose the guitar end pin. and insert the
Holder "A."
fig.10-2
12
GK-2A
3. Attach the Holder "B."
fig.10-3
Holder B
4. Tighten the Holder "A"and "B" with Wing
Nut, Spring Washer,Washer.
Wing nut
Washer
Spring Washer