Table of Contents
Advertisement
Operation
Getting connected
* To prevent malfunction, and/or damage to
speakers and other gear, make sure to turn down
the volume on all your devices, then turn off their
power before you hook anything up.
* Once you're hooked up correctly, follow the
procedure below to turn on the power. If you fail
to follow this procedure, the system may
malfunction, or your speakers may be damaged.
1. Make sure that your GK-compatible device
is turned off, and then use a GK cable to
connect the GK-2B to your GK-compatible
device.
* Connect the GK connector of the GK-2B to your
GK-compatible device.
fig.32_e
* To make connections to a GK-compatible device,
use a GK cable (GKC-3/5/10) or the special cable
included with the GK-compatible device. Never
use any other cable, since doing so may cause
malfunction.
GK Cable
GK IN
GK-compatible Device
* The GK cable includes a locking mechanism, so
do not pull it with excessive force. Release the
lock and disconnect the cable. Press the lock with
your thumb and slide the plug out to disconnect
it easily.
fig.33
19
Advertisement
Table of Contents
