Table of Contents
Advertisement
1. You decide on the location in which to
install the pickup.
For a four-string bass:
Attach the divided pickup so that the center
marker is between strings 2 and 3, the 2nd
string marker is directly below string 1, and the
5th string marker is directly below string 4.
(Viewed from above)
fig.07a_e
4
(Viewed from the neck)
fig.07b_e
1
2nd string marker
* Depending on the GK-compatible device, it is
possible to install the pickup so that the center
marker is between strings 1 and 2, or between
strings 3 and 4. Refer to the manual for your
GK-compatible device.
For a five-string bass:
Attach the divided pickup so that the center
marker is between strings 2 and 3, the 2nd
string marker is directly below string 1, and the
5th string marker is directly below string 4.
fig.08_e
5
4
* Depending on the GK-compatible device, it is
possible to install the pickup so that the center
marker is between strings 3 and 4. Refer to the
manual for your GK-compatible device.
String
3
2
1
2
3
4
5th string marker
String
3
2
1
Attaching the GK-2B to Your Bass
For a six-string bass:
Attach the divided pickup so that the center
marker is between strings 3 and 4, the 2nd
string marker is directly below string 2, and the
5th string marker is directly below string 5.
fig.09_e
6
5
* The divided pickup must be installed in the
correct orientation. Make sure that the cable from
the divided pickup is extending from the bridge
side.
fig.10_e
Bridge
* Route the pickup cable so that it can be smoothly
connected to the controller, and will not get in
the way of operating the controls of your bass.
fig.11
4
3
2
1
String
13
Advertisement
Table of Contents
