Operating The Re-20; Basic Operation - Roland RE-20 Owner's Manual

Roland space echo owner's manual
Table of Contents

Advertisement

Operating the RE-20

Basic Operation

For this demonstration of using the pedals, first press the EFFECT ON/OFF pedal to
switch on the effect (ON/OFF indicator lit), and set the DIRECT switch to ON.
fig.080
1. Set the knobs as shown in the figure.
2. Using the INPUT VOLUME knob
device, adjust the input level so that the PEAK LEVEL indicator
momentarily when the instrument connected to the RE-20 is played forcefully.
3. Set the MODE SELECTOR knob
4. Turn the ECHO VOLUME knob
5. Turn the REPEAT RATE knob
6. Turn the INTENSITY knob
7. Turn the BASS knob
8. Turn the TREBLE knob
9. Set the MODE SELECTOR knob
10. Turn the REVERB VOLUME knob
11. Turn the MODE SELECTOR knob
* For more detailed information on the Variation mode types, refer to the "About the Variation Mode"
(p. 18).
12
1
2
3
4
5
6
8
7
6
to adjust the volume of the echo.
4
to adjust the echo interval.
5
to adjust the volume of the echo's repeat.
1
to adjust the echo's low-frequency range.
2
to adjust the echo's high-frequency range.
7
3
7
9
7
8
and the volume control on the connected
to the 1 position.
to the REVERB ONLY position.
to adjust the volume of the reverb.
to select the Variation mode.
9
lights

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents