MAKING THE CONNECTIONS
When making connections to other equipment, be sure that all equipment is switched off. If you try to make connections
while the power is turned on, the settings for the FC-200 may be changed.
* If you want to use a foot switch for changing the mode, be sure to connect a BOSS FS-5U foot
* When hooking up a separately available BOSS FS-5U foot switch, set the polarity switch as
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other
* Sshould the FC-200 tend to rock a little when placed on the floor, turn the two adjusters on the
unit's bottom until you have it in a stand
Loading Batteries
The FC-200 is not loaded with batteries when purchased. If you want to use batteries instead of an
AC adaptor, then refer to "ABOUT CHANGING THE BATTERIES" (p. 33) and install batteries first.
Connecting an AC Adaptor
If you're using a BOSS PSA-Series AC adaptor, here's how to connect the cord and secure it on the
cord hook.
8
External MIDI Device
switch (Optional) to the MODE jack.
shown below.
expression pedals, you risk causing malfunction and/or damage to the unit.
MIDI IN
MIDI OUT
MIDI OUT
MIDI IN
Polarity Switch
External MIDI Device