Using [Value]/[Dec] [Inc]/Numeric Keys - Boss Dr. Rhythm DR-770 Owner's Manual

Using [VALUE]/[DEC] [INC]/Numeric Keys

You can use [VALUE]/[DEC] [INC]/numeric keys to modify or set various values while
operating the DR-770, for example to select patterns or songs, to adjust the tempo, or to
modify effect settings.
fig.101-05a
( 2 )
(1) [VALUE]
Use this knob to make large changes in a value. The value will change continuously,
according to the speed at which the knob is rotated.
(2) [DEC] [INC]
Use these buttons to make fine adjustments to a value. If you continue holding a button,
the value will change continuously.
If you continue holding a button and then press the other button, the value will change
more rapidly.
(3) Numeric Keys
Use these when you wish to specify a value directly. After using the numeric keys to
input a value, press [ENTER] to finalize the value.
For example, if you want to select pattern number "50," you would press: [5], [0],
[ENTER].
When specifying note values (as when making Quantize (p. 53) settings), you can use the
numeric keys to select the note value that is printed at the upper right of each key.
Pressing [1] will turn a setting OFF.
When inputting characters for a pattern name (p. 61) or song name (p. 65), use the
numeric keys to select the alphabetical characters and symbols printed at the upper left
of each key.
Each time you press a numeric key, the character or symbol will change as follows.
(Example)
When [1] is pressed: 1
When [0] is pressed: 0
In the explanations in chapter 2 and following, button names will be abbreviated
as [VALUE*] in cases where it does not matter whether you use [VALUE] or [DEC]
[INC] or the numeric keys.
( 3 )
MODE FUNC PAD BANK
A B -> C
* . –
Chapter 1. Before You Create Rhythms
( 1 )
a b c
45