Husqvarna 325iRJ Operator's Manual page 4

27. Support flange
28. Locknut
29. Transport cover
30. Harness
31. J-handle
32. Suspension point
33. Drive disc
Symbols on the product
WARNING! This product can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and understand
the contents of the operator's manual.
Please read the operator's manual
carefully and make sure you understand
the instructions before the product is
used.
Use approved hearing protection. Use
approved eye protection.
Maximum speed or no-load speed.
XXXX /min Revolutions or reciprocations per mi-
-1
or min nute.
Rated voltage, V
Direct current.
The product agrees with the applicable
EC directives.
This product conforms to the applicable
UK regulations.
Use approved protective gloves.
4
Use heavy-duty slip-resistant boots.
Beware of blade thrust.
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
The attachment can forcibly throw objects
that can bounce back. This can result in
serious eye injuries if the recommended
safety equipment is not used.
Disconnect battery before maintenance.
The product has protection against
splashing water.
Keep all parts of your body away from the
hot surfaces.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislations "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 22 .
yyyywwxxxx
Technical
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week and xxxx
is the sequential number.
The operator must ensure
that no people or animals
come closer than 15 me-
tres. When several oper-
ators are working at the
same site a safety dis-
tance of at least 15 metres
must be in effect.
1858 - 004 - 02.06.2023