Table of Contents
Advertisement
Before you operate the product
•
Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
•
Do an overhaul inspection of the product.
•
Do the safety inspections, maintenance and
servicing that are given in this manual.
•
Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
•
Make sure that there are no cracks at the bottom of
the grass blade teeth or by the center hole of the
blade. Replace the blade if it is damaged.
•
Examine the support flange for cracks. Replace the
support flange if it is damaged.
•
Make sure that the locknut can not be removed
by hand. The locknut must have a locking force
of minimum 1.5Nm. Make sure that the tightening
torque is between 35-50 Nm.
•
Examine the cutting attachment guard for damages
or cracks. Replace the cutting attachment guard if it
has been hit or if it has cracks.
16
•
Examine the trimmer head for damages or cracks.
Replace the trimmer head if it has been hit or if it has
cracks.
Work position
•
Hold the product with 2 hands.
•
Hold the product on the right side of your body.
•
Keep the cutting attachment below waist level.
•
Always keep the product attached to the harness.
•
Keep body parts away from the hot surfaces.
•
Keep body parts away from the cutting attachment.
To adjust the harness
1. Put on the harness.
2. Attach the harness to the suspension point.
3. Adjust the length of the harness until the suspension
point is in level with your right hip.
To start the product
1. Push and hold the start button until the green LED
comes on.
2. Use the power trigger to control the speed.
To limit the maximum speed with the
mode button
The product has a mode button. With the the mode
button the operator can limit the maximum speed. The
mode button has 3 speed levels. A lower level increases
the time of operation for the product. Use level 1 and
level 2 if the operation does not require full speed/full
1858 - 004 - 02.06.2023
Advertisement
Table of Contents
