Related Manuals for Philips 27E1N5500E
Summary of Contents for Philips 27E1N5500E
- Page 1 Monitor 5000 Series 27E1N5500E User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.com/welcome...
-
Page 2: Table Of Contents
5.1 Resolution & Preset Modes ..16 6. Power Management ....17 7. Customer care and warranty .. 18 7.1 Philips’ Flat Panel Monitors Pixel Defect Policy .....18 7.2 Customer Care & Warranty ..21 8. Troubleshooting & FAQs ..22 8.1 Troubleshooting ...... -
Page 3: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 4 degrees. If the -5 degree downward • Oil-based cleaning solutions may tilt angle maximum is exceeded, the damage the plastic parts and void monitor damage will not be covered the warranty. under warranty. • Unplug the monitor if you are not • Do not knock or drop the monitor going to use it for an extensive during operation or transportation.
-
Page 5: Notational Descriptions
1.2 Notational Descriptions Uninterrupted display of still or static images over an extended The following subsections describe period may cause “burn-in”, also notational conventions used in this known as “after-imaging” or “ghost document. imaging”, on your screen. • “Burn-in”, “after-imaging”, or Notes, Cautions and Warnings “ghost imaging”... -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
5000 Series 27E1N5500E Quick start 2. Hold the stand with both hands. Register your product and get support at www.philips.com/welcome (1) Gently attach the base to the stand. (2) Use your fingers to tighten the screw located at the bottom of the base. -
Page 8: Operating The Monitor
2.2 Operating the monitor Connecting to your PC Description of the control buttons Kensington anti-theft lock Press to switch power on. HDMI 1 input Press more than 3 seconds HDMI 2 input to switch power off. DisplayPort input Access the OSD menu. Audio Out Confirm the OSD adjustment. - Page 9 SmartResponse O , Fast , Faster, Fastest On, O SmartFrame in all Philips LCD monitors. It allows an Size (1, 2, 3, 4, 5, 6, 7) end user to adjust screen performance Brightness (0~100) or select functions of the monitors...
- Page 10 Height adjustment Note • MPRT: To reduce motion blur, LED backlight will strobe synchronously with screen refresh, which may cause noticeable brightness change. • 75Hz refresh rate or higher is re- quired for MPRT. • Adaptive Sync and MPRT cannot be 130mm enabled simultaneously.
-
Page 11: Remove The Base Assembly For Vesa Mounting
2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 0° 90° 1. Place the monitor face down on a -5° smooth surface. Pay attention not * Display design may differ from those to scratch or damage the screen. -
Page 12: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • FPS: For playing FPS (First Person Based on a scenario you select, Shooters) games. Improves dark SmartImage dynamically enhances the theme black level details. -
Page 13: Smartcontrast
Developed for wellbeing, and viewing enjoyment, stepping up Philips LowBlue Mode setting uses backlighting for clearer, crisper and a smart software technology to brighter images or dimming backlighting... -
Page 14: Adaptive Sync
4. Adaptive Sync • AMD Radeon R9 285 • AMD Radeon R7 260X • AMD Radeon R7 260 ■ Processor A-Series Desktop and Adaptive Sync Mobility APUs • AMD A10-7890K PC gaming has long been an imperfect • AMD A10-7870K experience because GPUs and monitors update at different rates. -
Page 15: Technical Specifications
5. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.2331 (H) mm x 0.2331 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 2560 x 1440 @ 60 Hz Viewing Angle 178°... - Page 16 Off mode 0.3 W 0.3 W 0.3 W AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 60Hz 115VAC , 60Hz 230VAC , 50Hz 89.08 BTU/hr 88.74 BTU/hr 89.08 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby mode)
- Page 17 Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 18: Resolution & Preset Modes
For best output performance, please always ensure that your graphic card Recommended Resolution is capable of achieving the maximum 2560 x 1440 @ 60 Hz resolution and refresh rate of this Philips display. H. freq Resolution V. freq (Hz) (kHz) 31.47 720 x 400 70.09... -
Page 19: Power Management
6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. -
Page 20: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 21 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 22 BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer...
-
Page 23: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 24: Troubleshooting & Faqs
• Contact with Philips customer • First, ensure that the power button service representative immediately. on the rear of the monitor is in the... -
Page 25: General Faqs
"burn-in", also Service contact information listed in known as "after-imaging" or "ghost Important information manual and imaging", on your screen. "Burn-in", contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology. - Page 26 When handling the disconnect your old monitor and monitor, make sure that there is reconnect your Philips LCD monitor. no pressure or force applied to • Turn on your monitor and then turn the panel surface side. This may on your PC.
- Page 27 Can I connect my LCD monitor to that will not disappear and cannot be any PC, workstation or Mac? repaired. The damage mentioned above Ans.: Yes. All Philips LCD monitors are is not covered under your warranty. fully compatible with standard PCs, Macs and workstations.
- Page 28 Q14: Where can I find Important Information manual mentioned in EDFU? Ans.: Important Information manual can be download on the Philips website support page.
- Page 29 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.