Installing The Osa Smbridge Management Utility Program - IBM System x3850 Installation Manual

Modified bootcfg program output
Boot Loader Settings
----------------------------
timeout: 30
default: multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
redirect: COM1
redirectbaudrate: 19200
Boot Entries
----------------
Boot entry ID: 1
OS Friendly Name: Windows Server 2003, Standard
Path: multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
OS Load Options: /fastdetect /redirect
You must restart the Windows 2003 operating system after completing this
procedure for the changes to take effect and to enable SOL.

Installing the OSA SMBridge management utility program

Complete the following steps to install the OSA SMBridge management utility
program on a server running a Windows operating system:
1. Go to http://www.ibm.com/servers/eserver/support/xseries/index.html, download
2. Insert the OSA BMC Management Utility CD into the drive. The InstallShield
3. Follow the prompts to complete the installation.
the utility program, and create the OSA BMC Management Utility CD.
wizard starts, and a window similar to that shown in the following illustration
opens.
Chapter 4. Configuring the server
41