IBM System x3850 Installation Manual page 30

Hide thumbs Also See for System x3850:

Table of Contents

IBM System x3850 Type 8864: Installation Guide

b. Open the microprocessor-tray levers ( 2 ).

c. Pull out the microprocessor tray ( 3 ) until it stops and then reposition your

hands to grasp the body of the tray.

d. Press in on the release latches on each side of the tray ( 4 ); then, pull the

tray out the rest of the way.

6. Lift the air baffle out of the microprocessor tray.

Air baffle

7. Remove the microprocessor baffle from a microprocessor socket and store it

for future use. If you remove a microprocessor you must install a

microprocessor baffle to prevent the server from over heating.

Heat sink

Microprocessor

retention clip

baffle

8. Open the heat sink retention clip.

a. Press down on one side of the heat sink retention clip to release it from the

side of the socket; then, repeat the process on the opposite side.

Heat sink

Microprocessor

baffle

VRM 4

Table of Contents

8864