To remove a memory module:
1.
Prepare the computer for disassembly (see
2.
Remove the stand (see
3.
Remove the rear port cover (see
4.
To remove a memory module, press outward on the two latches on each side of the memory module (1),
then pull the memory module out of the slot (2).
5.
Slide the new memory module into the slot at approximately a 30° angle (1), then press the memory
module down (2) so that the latches lock it in place.
NOTE:
on the memory slot.
The computer automatically recognizes the additional memory when you turn on the computer.
30
Chapter 4 Removal and Replacement Procedures
Stand on page
Rear port cover on page
A memory module can be installed in only one way. Match the notch on the module with the tab
Preparing to disassemble the computer on page
21).
23).
21).