Table of Contents
Advertisement
Finishing Material Installed with Passive Heat Optional Heat Management System
= COMBUSTIBLE MATERIAL ALLOWED
OPEN TOP DISCHARGE
*
2 IN. MIN.
(51 mm)
DO NOT INSTALL
FINISHING MATERIAL
ON THIS SURFACE.
2 IN. (51 mm) MIN.
OPENING MUST
NOT BE BLOCKED
*
= Mesh screen required for front discharge or open top discharge passive heat installations with
discharge opening of 3 in. (76 mm) or greater.
SIDE DISCHARGE
(DISCHARGE SLOTS ON BOTH SIDES OF APPLIANCE)
REGISTER COVER
SLOTS FACE FRONT
OF APPLIANCE
Figure 10.10 Finishing Material installed with Passive Heat Optional Heat Management System
62
Majestic • MER36MN, MER42MN Installation Manual • 2599-980 Rev. B • 5/23
FRONT DISCHARGE
2 IN. MIN.
(51 mm)
DO NOT INSTALL
FINISHING MATERIAL
ON THIS SURFACE.
2 IN. (51 mm) MIN.
OPENING MUST NOT
BE BLOCKED
8-3/4 IN.
(222 mm)
12-1/4 IN.
(311 mm)
*
Advertisement
Table of Contents
