Restoring The Factory Settings; Specifications - Roland AX-7 Owner's Manual

Miscellaneous
Selecting Patches
(1) If you haven't yet saved your current settings,
do it now (see above).
(2) Leave the currently selected EDIT mode by
pressing [CONTROL], [DATA], or [PRG≈CHG]
(depending on which of these buttons lights).

Restoring the factory settings

You can reset the AX-7 to its factory settings, which means that your own Patches will be overwritten with the
settings the AX-7 contained when you first got it. You may wish to archive your Patches before initializing the
AX-7 (see p. 15).
Power on the AX-7 while holding down the [WRITE] button. The display will read factory Setup (scrolling
message) as soon as the factory settings have been loaded.
See page 110 for a list of the AX-7's factory settings.
Specifications
Keyboard:
Display:
Realtime controllers:
Memories:
Connectors:
Compatibility:
Power supply:
Dimensions:
Weight:
Supplied accessories:
Options:
Note: Specifications are subject to changes without prior notice.
18
45 keys, velocity sensitive
3 x 7 segments
Data Entry knob, Expression Bar/Touch Controller, D Beam Controller, Sustain button
128 Patches
MIDI In, Out, DC IN (adaptor)
GM/GM2/GS, all MIDI messages
Batteries, AC/DC adaptor (DC 9V)
1010 (W) x 195 (D) x 102 (H) mm
3 kg
6 x dry batteries (AA type), MIDI cable, owner's manual, shoulder strap
Roland ACA adaptor (9V, 200mA)
(3) Use the [A/B] and [1]~[8] buttons to select the
desired Patch memory.
You can also use [DOWN]/[UP]. If, after select-
ing Patch b88, you press [UP] yet again, you
return to Patch A11. Conversely, if you press
[DOWN] after selecting Patch A11, you will go
to Patch b88.