Restoring The Factory Settings; Specifications - Roland A-37 Owner's Manual

Selecting Patches
(1) If you haven't yet saved your current settings, do it
now (see above).
(2) Leave the currently selected EDIT mode by pressing
[CONTROL], [DATA], or [PRG≈CHG] (depending on
which of these buttons lights).
(3) Use the [A/B] and [1]~[8] buttons to select the
desired Patch memory.
You can also use [DOWN]/[UP]. If, after selecting
Patch b88, you press [UP] yet again, you return to
Patch A11. Conversely, if you press [DOWN] after
selecting Patch A11, you will go to Patch b88.

6.4 Restoring the factory settings

You can reset the A-37 to its factory settings, which
means that your own Patches will be overwritten
with the settings the A-37 contained when you first
got it. You may wish to archive your Patches before
initializing the A-37 (see p. 12).
Power on the A-37 while holding down the [WRITE]
button. The display will read factory Setup
(scrolling message) as soon as the factory settings
have been loaded.
See page 109 for a list of the A-37's factory settings.
6.5 Specifications
Keyboard: 76 keys, velocity sensitive, with channel
Aftertouch
Display 3 x 7 segments
Realtime Data Entry slider, Bender/Modulation lever,
controllers channel Aftertouch, Hold Foot Switch
socket, Foot Pedal socket
Memories 128 Patches
Connec- MIDI In, Out A, Out B, Thru, Expression
tions: Pedal, Sustain Footswitch, DC IN (adaptor)
Compatibil- GM/GM2/GS, all MIDI messages
ity:
Power Batteries, AC/DC adaptor (DC 9V)
supply:
Dimensions: 1195 (W) x 270 (D) x 113 (H) mm
Weight: 7.7 kg
Supplied 6 x dry batteries (AA type), MIDI cable,
accessories: Owner's Manual, Music Rest
Options: Roland ACA adaptor (9V, 200mA)
DP-2, DP-6, or BOSS FS-5U footswitch
EV-5, Boss FV-300L expression pedal
Note: Specifications are subject to changes without
prior notice.
r A-37
17