Table of Contents
Advertisement
Switch on device
Fig. †
1. Plug in the mains plug.
2. The alarm signal sounds. The
temperature display 3 flashes.
3. Press the temperature setting button 1.
The alarm signal goes off.
As soon as the freezer compartment has
reached the set temperature,
temperature display 3 lights up.
The factory recommends the
following settings:
Cold room: medium setting
■
■
Freezer compartment: -18 °C
Store sensitive foods in the refrigerator
compartment.
Instructions for use
After switching on, it can take several
■
hours before the set temperatures are
reached.
The fully automatic NoFrost system keeps
■
the freezer compartment free of ice.
Defrosting is unnecessary.
The front of the appliance behind the
■
door becomes partially light
heated to prevent the formation of
condensation near the door seal.
If the door of the freezer compartment
■
cannot be opened again immediately
after closing, you must wait a while
until the negative pressure has
disappeared.
Set up
the temperature
Cold room
Turn the temperature control, Fig. !/8,
to the desired setting.
We recommend the setting on the
marking.
By changing the setting clockwise, the
temperature in the refrigerator
compartment decreases.
At a room temperature below 16 °C, set
the device slightly warmer. At a room
temperature above 32 °C, set the device
slightly colder.
Selecting a very cold setting
momentarily only if:
the door is often opened,
■
large quantities of food are
■
placed in the refrigerator
compartment.
freezer room
The temperature is adjustable from -18 °C
to -24 °C.
Press the temperature setting button 1
repeatedly until the desired temperature is
set in the freezer compartment.
The last set value is stored in memory.
The set temperature is displayed on the
temperature indicator 3 indicated.
NL
75
Advertisement
Table of Contents
