Table of Contents
Advertisement
Malfunction
The side walls of the
appliance are warm.
The lighting is not
working.
Dim lighting of the
controls.
No indication is lit. Power failure; the fuse is
The appliance does not cool,
the temperature display and
the lighting are on.
Possible cause
Pipes run in the side walls
that heat up during the
cooling process.
The LED lighting is broken.
The door was open too long.
The lighting switches off after
approx. 10 minutes
turned off.
When the unit is not
operated for a while,
the control panel
indication on the
energy saving mode.
turned off; the plug is not properly
inserted into the socket.
The presentation light
is enabled.
Solution
This is normal for the device and not a
malfunction.
Furniture that stands against the
appliance is not damaged by this heat.
See chapter "Lighting (LED)".
After closing and opening the door, the
lighting comes on again.
As soon as the appliance is in use again, eg
when the door is opened, the display
switches back to normal lighting.
Plug in the mains plug. Check if
there is power. Check the fuses.
Press and hold the temperature setting
button Fig. "/1 for 10 seconds until a
confirmation signal is heard.
After a while, check whether the device is cooling.
NL
85
Advertisement
Table of Contents
