Resetting all settings
Phenomena that may be easy to be mistaken for machine defects
Phenomenon
148
Cases not involving a machine defect
The electrical power cord is not plugged in.
The main power source has been interrupted during
operation such as by a power outage (blackout), etc.
Either there is no lamp and/or lamp cover, or either
The HDMI/MHL output device is not recognized.
HDMI 1/MHL
Not supported HDMI/MHL signal is input.
HDMI 1/MHL
The signal cables are not correctly connected.
83
76
Troubleshooting
Reference
page
18
136
24
~