Gravely Pro-Stance 1934FX Owner's/Operator's Manual page 26

1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Loosen nuts (A).
3. Adjust neutral switch (B).
• If neutral switch sensitivity needs to be increased, adjust
switch (B) down in slots.
• If neutral switch sensitivity needs to be decreased, adjust
switch (B) up in slots.
4. Tighten nuts (A).
Service Steering & Brakes
Adjusting Park Brake
Testing Park Brake:
1. Inflate tires to correct pressures.
2. Stop machine on a maximum 17° slope.
3. Lock park brake.
• A properly adjusted park brake must prevent the drive wheels
from turning.
• If the drive wheels turn, a brake adjustment will be necessary.
Adjusting Park Brake:
1. Park machine safely. (Refer to Parking Safely in the SAFETY
section.)
2. Unlock park brake.
A
C
B
3. Remove rue clip (B).
4. Turn brake linkage yoke in one-turn increments on the brake
link rod (C) clockwise to increase braking force;
counterclockwise to decrease braking force.
5. Install rue clip (B).
6. Test park brake. Adjust again, if required.
Service Mower
Removing and Installing Mower Deck Shield
CAUTION: Avoid injury! Help prevent serious personal
injury. Do not operate the mower without the mower deck
shield installed.
Removing Mower Deck Shield:
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
A
2. Remove two knobs (A).
3. Lift shield (B) and pull forward to disengage from under tabs
(C) on the frame.
4. Remove mower deck shield (B).
GB - 26