A List Of Direct Key Combinations - NEC HIGHlite 4000Dsx User Manual

A List of Direct Key Combinations

CTL+ INPUT (1-10)
CTL+ ENTER (While displaying Entry list)
CTL+ MUTE PICTURE(SHUTTER)
CTL+CANCEL
CTL+ UNDO
CTL+ / / /
While using zoom on remote control:
CTL+ (BS)
CTL+MUTE (OSD)
INPUT(1-10) in SW Level mode
CTL+ MENU (ADDRESS)
CTL+ IMAGE (PROJECTOR)
CTL+ POSITION (LENS)
CTL+ KEYSTONE (R)
CTL+ AMPLITUDE (G)
CTL+ ENTRY LIST (B)
CTL+ MAGNIFY (ZOOM)
CTL+ (FOCUS)
Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote keys for direct input
selection in the Entry Edit window.
Displays the Entry Edit Command window.
Blocks all Projector Light Output.
Returns to the previous menu without closing the slidebar or dialog.
Clears all menus or adjustment/setting screens. All adjustments are saved automatically.
Moves the slidebar or dialog box horizontally or vertically.
Displays the magnifying glass icon.
Deletes one letter or numeral in the entry screen.
Turns off the on-screen display forcefully.
Displays the Select switcher Input Slot window.
NOTE: This feature is available for SW 2 Level mode only.
When the SW 1 Level mode is selected, pressing INPUT key switches to the corresponding
slot without displaying the Select Slot window.
Displays the remote ID entry window.
Sequentially selects the Projector Options sub menu.
Displays the Lens Shift control window.
Turns on red. Available only when the projector is in the test pattern mode.
Turns on green. Available only when the projector is in the test pattern mode.
Turns on blue. Available only when the projector is in the test pattern mode.
Zooms the lens in and out
Adjusts the lens focus.
E – 27