NEC ME401X User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. ME401X
  6. User manual

NEC ME401X User Manual

Hide thumbs Also See for ME401X:
Table of Contents

Advertisement

Quick Links

Projector
ME401W/ME361W/ME331W/ME301W
ME401X/ME361X/ME331X/ME301X
User's Manual
Please visit our web site for User's Manual in the latest version:
http//www.nec-display.com/dl/en/pj_manual/lineup.html
Model No.
NP-ME401W/NP-ME361W/NP-ME331W/NP-ME301W/NP-ME401X/NP-ME361X/NP-ME331X/NP-ME301X

Advertisement

Table of Contents
loading

Related Manuals for NEC ME401X

Summary of Contents for NEC ME401X

  • Page 1 Projector ME401W/ME361W/ME331W/ME301W ME401X/ME361X/ME331X/ME301X User’s Manual Please visit our web site for User’s Manual in the latest version: http//www.nec-display.com/dl/en/pj_manual/lineup.html Model No. NP-ME401W/NP-ME361W/NP-ME331W/NP-ME301W/NP-ME401X/NP-ME361X/NP-ME331X/NP-ME301X...
  • Page 2 • Apple, Mac, Mac OS, OS X, MacBook, and iMac are trademarks of Apple Inc. registered in the U.S. and other countries. • iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. • APP Store is a service mark of Apple Inc. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. • MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands in the U.S. and other countries. • AccuBlend, NaViSet, MultiPresenter, and Virtual Remote are trademarks or registered trademarks of NEC Dispolay Solutions, Ltd. in Japan, in the United State and other countries. • The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas. • Wi-Fi , Wi-Fi Alliance , and Wi-Fi Protected Access (WPA, WPA2) are registered trademarks of the Wi-Fi Alliance.

  • Page 3: Important Information

    Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit. This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided. The information should be read carefully to avoid problems. WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THE PRONGS CAN BE FULLY INSERTED. DOC Compliance Notice (for Canada only) This Class B digital apparatus complies with Canadian ICES-003. Machine Noise Information Regulation - 3. GPSGV, The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

  • Page 4: Important Safeguards

    Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regu- lation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.
  • Page 5 Important Information WARNING • Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap due to the heat emitted from the light output. • Do not place any objects, which are easily affected by heat, in front of the projection window. Doing so could lead to the object melting from the heat that is emitted from the light output. • Do not use a spray containing flammable gas to get rid of accumulated dust and dirt on the filters and the projection window. It may cause of fire. Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10˚ Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the exhaust vent as it can become heated while the projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.
  • Page 6 • Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].) • Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blink- ing blue. Doing so could cause premature lamp failure. Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not short, heat, or take apart batteries. • Do not throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries’ polarity (+/−) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. Note for Canadian Environmental Protection Act, 1999 The lamp(s) in this product contains mercury. Please dispose according to your local authority law. FOR MORE INFORMATION, CONTACT: NEC Display Solutions of America, Inc. 500 Park Boulevard, Suite 1100, Itasca, Illinois 60143-1248 TELEPHONE 800-836-0655 www.necdisplay.com...

  • Page 7: Lamp Replacement

    Important Information Note for US Residents The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 103. • Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHED THE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer for lamp replacement. A Lamp Characteristic The projector has a discharge lamp for special purposes as a light source. A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of its lower brightness. The actual lamp life may vary depending upon the individual lamp, the environmental conditions and usage. CAUTION: • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

  • Page 8: Power Management Function

    Important Information Power management function The projector has power management functions. To reduce power consumption, the power management functions (1 and 2) are factory preset as shown below. To control the projector from an external device via a LAN or serial cable connection, use the on-screen menu to change the settings for 1 and 2. 1. STANDBY MODE (Factory preset: NORMAL) To control the projector from an external device, select [NETWORK STANDBY] for [STANDBY MODE]. NOTE: • When [NORMAL] is selected for [STANDBY MODE], the following terminals and functions will not work: MONITOR OUT terminal, AUDIO OUT terminal, USB(PC) port, LAN functions, Mail Alert function, DDC/CI (Virtual Remote Tool). Please refer to page 75 about details. • When [NETWORK STANDBY] has been set for [STANDBY MODE] and the LAN has been in link-down condition for 3 minutes, [STANDBY MODE] will transit into [NORMAL] automatically for the purpose to save the consumption power. 2. AUTO POWER OFF (Factory preset: 1 hour) To control the projector from an external device, select [OFF] for [AUTO POWER OFF].

  • Page 9: Table Of Contents

    Table of Contents Important Information ....................i 1. Introduction ......................1 ❶ What’s in the Box? ......................1 ❷ Introduction to the Projector ................... 2 Features you’ll enjoy: ....................2 About this user’s manual ..................3 ❸ Part Names of the Projector ..................4 Front/Top ........................4 Rear ......................... 5 Top Features ......................6 Terminal Panel Features ..................7 ❹ Part Names of the Remote Control ................
  • Page 10 Table of Contents ❼ Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function) ............33 ❽ Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display) ......................34 ❾ Controlling the Projector by Using an HTTP Browser ..........36 ❿ Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) ......................43 What you can do with GCT ..................43 Projecting an Image from an Angle (GCT) ............. 43 4. Using the Viewer ..................... 45 ❶ What you can do with the Viewer ................. 45 ❷ Projecting images stored in a USB memory device ............. 47 5. Using On-Screen Menu ................
  • Page 11 Table of Contents 6. Installation and Connections ..............86 ❶ Setting Up the Screen and the Projector ..............86 Selecting a Location....................86 Throw Distance and Screen Size ................88 ❷ Making Connections ....................90 Connecting Your Computer ..................90 Connecting an External Monitor ................92 Connecting Your DVD Player or Other AV Equipment ..........93 Connecting Component Input ................94 Connecting HDMI Input ..................95 Connecting to a Wired LAN ..................96 Connecting to a Wireless LAN (Optional: NP05LM series) ........97 7.

  • Page 12: Introduction

    (US: 7N080236/7N080242) (7N520089) (24J41711) (EU: 7N080022/7N080028) For North America only Limited warranty For customers in Europe: You will find our current valid Guarantee Policy on our Web NEC Projector CD-ROM Site: User’s manual (PDF) www.nec-display-solutions.com (7N952531) • Important Infomation (7N8N7551) • Quick Setup Guide (7N8N7561) Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the ME361W.

  • Page 13: ❷ Introduction To The Projector

    1. Introduction ❷ Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Features you’ll enjoy: • Quick start (6 seconds* ), Quick Power Off, Direct Power Off 6 seconds* after turning on the power, the projector is ready to display PC or video images. The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel. The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or disconnecting the AC power supply. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker. The quick start time is only when [STANDBY MODE] is set to [NETWORK STANDBY] in the on-screen mes- sage. • 0.23W(100-130 V AC)/0.45W (200-240 V AC) in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.23W(100-130 V AC)/0.45W (200-240 V AC).

  • Page 14: About This User's Manual

    1. Introduction • Convenient utility software (User Supportware) This projector supports our utility software (NaViSet Administrator 2, Virtual Remote Tool, etc.) NaViSet Admin- istrator 2 helps you control the projector by a computer via wired LAN connection. Virtual Remote Tool helps you perform operations by a virtual remote control such as projector's power on or off and signal selection via wired LAN connection. Moreover, it has function to send an image to the projector and register it as the logo data. Image Express Utility Lite (for Windows) can be started from a commercially available USB memory or SD card without the need of installing on your computer. Please visit our web site for downloading each software. URL: http://www.nec-display.com/dl/en/index.html • AUTO POWER ON and AUTO POWER OFF features The DIRECT POWER ON, AUTO POWER ON, AUTO POWER OFF, and OFF TIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet. • Preventing unauthorized use of the projector Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence. • High resolution up to WUXGA* High resolution display - up to WUXGA compatible, XGA (ME401X/ME361X/ME331X/ME301X)/WXGA (ME401W/ ME361W/ME331W/ME301W) native resolution. • An image with higher or lower resolution than the projector’s native resolution (ME401W/ME361W/ME331W/ ME301W: 1280 × 800 / ME401X/ME361X/ME331X/ME301X: 1024 × 768) will be displayed with Advanced AccuBlend. When WXGA MODE is set to ON. • CRESTRON ROOMVIEW compatibility The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be man- aged and controlled from a computer or controller. About this user’s manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it.

  • Page 15: ❸ Part Names Of The Projector

    1. Introduction ❸ Part Names of the Projector Front/Top Zoom Lever Controls (→ page 17) (→ page 6) Focus Ring (→ page 17) Exhaust Vent Heated air is exhausted from here. Intake Vent / Filter Cover (→ page 100, 106) Lens Remote Sensor Adjustable Tilt Foot Lever (→...

  • Page 16: Rear

    1. Introduction Rear As the theft and dropping-off Lamp Cover (→ page 103) prevention measure, fix on the sup- plied strap. Monaural Speaker (20 W) Terminal Panel (→ page 7) Built-in Security Slot ( Rear Foot (→ page 16) AC Input Security chain opening Connect the supplied power cord’s Attach an anti-theft device.

  • Page 17: Top Features

    1. Introduction Top Features 1, 2 (POWER) Button (→ page 12, 21) 2. POWER Indicator (→ page 11, 12, 21, 108) 3. STATUS Indicator (→ page 108) 4. LAMP Indicator (→ page 103, 108) 5. ECO Button (→ page 24) 6. SOURCE Button (→ page 14) 7. AUTO ADJ. Button (→ page 20) 8. MENU Button (→ page 53) 9. ▲▼◀▶ / Volume Buttons ◀▶ / Keystone Buttons (→ page 18, 20, 26, 53) 10. ENTER Button (→ page 53) 11. EXIT Button (→ page 53)

  • Page 18: Terminal Panel Features

    1. Introduction Terminal Panel Features 1. COMPUTER IN/ Component Input Terminal (Mini D-Sub 15 Pin) (→ page 90, 92, 94) 2. COMPUTER AUDIO IN Mini Jack (Stereo Mini) (→ page 90, 91, 93) 3. HDMI 1 IN Terminal (Type A) (→ page 90, 91, 95) 4. HDMI 2 IN Terminal (Type A) (→ page 90, 91, 95) 5. USB (PC) Port (Type B) (→ page 90) 6. MONITOR OUT (COMPUTER) Terminal (Mini D- Sub 15 Pin) (→ page 92) 7. AUDIO OUT Mini Jack (Stereo Mini) (→ page 92) 8. VIDEO IN Terminal (RCA) (→ page 93) 9. VIDEO AUDIO IN L/MONO, R (RCA) (→ page 93) 10. LAN Port (RJ-45) (→ page 96) 11. USB Port (Type A) For USB memory or optional Wireless LAN unit (→ page 97) 12. PC CONTROL Port (D-Sub 9 Pin) (→ page 116)

  • Page 19: ❹ Part Names Of The Remote Control

    1. Introduction ❹ Part Names of the Remote Control 1. Infrared Transmitter 19. MENU Button (→ page 9) (→ page 53) 2. POWER ON Button 20. EXIT Button (→ page 12) (→ page 53) 21. ▲▼◀▶ Button 3. POWER STANDBY Button (→ page 21) (→ page 53) 4. SOURCE Button 22. ENTER Button (→ page 14) (→ page 53) 5. COMPUTER 1 Button 23. D-ZOOM (+)(–) Button (→ page 14) (→ page 23, 24)

  • Page 20: Battery Installation

    1. Introduction Battery Installation 1. Press firmly and slide the bat- 2. Install new batteries (AAA). En- 3. Slip the cover back over the bat- tery cover off. sure that you have the batteries’ teries until it snaps into place. polarity (+/−) aligned correctly.

  • Page 21: Projecting An Image (Basic Operation)

    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 11) Step 2 • Turning on the projector (→ page 12) Step 3 • Selecting a source (→ page 14) Step 4 • Adjusting the picture size and position (→ page 15) • Correcting keystone distortion [KEYSTONE] (→ page 18) Step 5 • Adjusting a picture and sound - Optimizing a computer signal automatically (→...

  • Page 22: ❷ Connecting Your Computer/Connecting The Power Cord

    2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see “6. Installation and Connections” on page 90. Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the computer’s port (mini D-Sub 15 Pin). Turn two thumb screws of both terminals to fix the computer cable (VGA). 2. Connect the supplied power cord to the projector.

  • Page 23: ❸ Turning On The Projector

    2. Projecting an Image (Basic Operation) ❸ Turning on the Projector 1. Remove the lens cap. Press and hold the two dent part on the lens cap and pull it toward you. 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.

  • Page 24: Note On Startup Screen (Menu Language Select Screen)

    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1. Use the ▲, ▼, ◀ or ▶ button to select one of the 30 languages from the menu. 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu operation.

  • Page 25: ❹ Selecting A Source

    2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the avail- able input source and display it. The input source will change as follows: HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → LAN → USB-B • With the SOURCE screen displayed, you can press the SOURCE button a few times to select the input source. TIP: If no input signal is present, the input will be skipped.

  • Page 26: ❺ Adjusting The Picture Size And Position

    2. Projecting an Image (Basic Operation) ❺ Adjusting the Picture Size and Position Use the adjustable tilt foot, the zoom function or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the throw angle (the height of an image) Adjusting the left and right tilt of an image [Tilt foot] (→ page 16) [Rear foot] (→ page 16) Finely adjusting the size of an image Adjusting the focus [Zoom lever] (→ page 17) [Focus ring] (→ page 17) Adjusting the keystone correction [KEYSTONE]* (→ page 18) Automatic Keystone Correction function is turned on at the time of shipment. To perform keystone correction manually, see “6. Correcting Keystone Distortion Manually” on page 18.

  • Page 27: Adjust The Tilt Foot

    2. Projecting an Image (Basic Operation) Adjust the Tilt Foot 1. Lift the front edge of the projector. CAUTION: Do not try to touch the exhaust vent during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. 2. Push up and hold the Adjustable Tilt Foot Lever on the front of the projector to extend the adjustable tilt foot.

  • Page 28: Zoom

    2. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus. Focus Ring...

  • Page 29: ❻ Correcting Keystone Distortion [Keystone]

    2. Projecting an Image (Basic Operation) ❻ Correcting Keystone Distortion [KEYSTONE] When the projector is not exactly perpendicular to the screen, keystone distortion occurs. For correcting this distor- tion, you can use the “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp, square image. The function of Automatic Keystone Correction is ON as the default factory setting. The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions when the projector is placed diagonally to the screen. • Before performing KEYSTONE correction The KEYSTONE correction has four features, KEYSTONE HORIZONTAL, KEYSTONE VERTICAL, PINCUSH- ION LEFT/RIGHT, PINCUSHION TOP/BOTTOM, and CORNERSTONE. If the value of either CONERSTONE or PINCUSHION has corrected, KEYSTONE HORIZONTAL and KEYSTONE VERTICAL are disabled. In this case, RESET the corrected values and restart to correct distortion. 1. Press the ▼ button on the projector cabinet. The Keystone screen will be displayed on the screen. • Press the KEYSTONE button when using the remote control.
  • Page 30 2. Projecting an Image (Basic Operation) 4. Press the ▲ button to select [HORIZONTAL] and then use the ◀ or ▶ so that the top and bottom sides of the projected image are parallel. • Adjust the horizontal keystone distortion. 5. Repeat steps 2 and 4 to correct keystone distortion. 6. After completing Keystone correction, press the EXIT button. The Keystone screen will disappear. • To perform Keystone correction again, press the ▼...

  • Page 31: ❼ Optimizing Computer Signal Automatically

    2. Projecting an Image (Basic Operation) ❼ Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. (COMPUTER) Press the AUTO ADJ. button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Adjusted picture] NOTE: Some signals may take time to display or may not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE] manually. (→ page 62, 63) ❽ Turning Up or Down Volume Sound level from the speaker or audio output can be adjusted.

  • Page 32: ❾ Turning Off The Projector

    2. Projecting an Image (Basic Operation) ❾ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. Power On Standby 2. Secondly, press the ENTER button or press the (POWER) or the STANDBY button again.

  • Page 33: ❿ When Moving The Projector

    2. Projecting an Image (Basic Operation) ❿ When Moving the Projector Preparation: Make sure that the projector is turned off. 1. Put on the lens cap. 2. Unplug the power cord. 3. Disconnect any other cables. • Remove the USB memory or the wireless LAN Unit if it is inserted into the projector. (→ page 49, 98)

  • Page 34: Convenient Features

    3. Convenient Features ❶ Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector’s power-saving function will work 10 seconds after the image is turned off. As a result, the lamp power will be reduced. NOTE: • Even though the image is turned off, the menu still remains on the screen. • Sound from the AUDIO OUT jack (Stereo mini) can be turned off. • Even when the power-saving function works, the lamp power may be restored to its original level temporarily. • To restore the image, even if you press the AV-MUTE button immediately after the start of the power-saving function, the lamp brightness may not be restored to its original level. ❷ Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing back. • This feature can not be used when USB-A is selected as the input terminal. ❸ Magnifying a Picture You can enlarge the picture up to four times. NOTE: • The maximum magnification may be less than four times depending on the signal.

  • Page 35: ❹ Changing Eco Mode/Checking Energy-Saving Effect

    3. Convenient Features 2. Press the ▲▼◀▶ button. The area of the magnified image will be moved 3. Press the D-ZOOM (−) button. Each time the D-ZOOM (−) button is pressed, the image is reduced. NOTE: • The image will be magnified or demagnified at the center of the screen. • Displaying the menu will cancel the current magnification. ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on emissions.

  • Page 36: Checking Energy-Saving Effect [Carbon Meter]

    3. Convenient Features NOTE: • The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE]. • The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME]. • The projector is always in [NORMAL] for 90 seconds after the lamp is turned on and while the POWER indicator is blinking green. The lamp condition will not be affected even when [ECO MODE] is changed. • After a lapse of 1 minute from when the projector displays no-signal guidance, a blue, black or logo screen, [ECO MODE] will automatically switch to [ECO]. The projector will return to its original setting once a signal is accepted. • If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [NORMAL] mode to protect the projector. When the projector is in [NORMAL] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [ECO MODE] returns to its original setting. Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [NORMAL] mode because the internal temperature is too high. • Immediately after [ECO MODE] is changed from [ECO] to one of [OFF], [AUTO ECO], or [NORMAL], the lamp brightness may decrease temporarily. This is not a malfunction. Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO emission reduction (kg) when the projector’s [ECO MODE] is set to [AUTO ECO], [NORMAL], or [ECO]. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS] message shows the total amount of CO emission reduction from the time of shipment up to now. You can check the information on [USAGE TIME] from [INFO.] of the menu. (→ page 81) The [CARBON SAVINGS-SESSION] message shows the amount of CO emission reduction between the time of changing to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS- SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE?] message at the time of power-off.

  • Page 37: ❺ Using 4-Point Corner To Correct Keystone Distortion [Cornerstone]

    3. Convenient Features ❺ Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE] Use the [CORNERSTONE] and [PINCUSHION] features to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right side of the screen longer or shorter so that the projected image is rectangular. Before performing correction The KEYSTONE correction has features, KEYSTONE (HORIZONTAL/VERTICAL), PINCUSHION (LEFT/RIGHT, TOP/ BOTTOM), and CORNERSTONE. If the value of either CONERSTONE or PINCUSHION has corrected, KEYSTONE HORIZONTAL and KEYSTONE VERTICAL are disabled. In this case, RESET the corrected values and restart to correct distortion Cornerstone 1. Press the KEYSTONE button with no menu displayed. The KEYSTONE screen will be displayed. • Press the KEYSTONE button when using the remote control. • See page for PINCUSHION. 2. Press the ▼ button to select [CORNERSTONE] and press the ENTER button. The drawing shows the upper left icon ( ) is selected.
  • Page 38 3. Convenient Features 5. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected image frame. 6. Press the ENTER button. 7. Use the ▲▼◀▶ button to move the projected image frame as shown on the example. 8.

  • Page 39: Pincushion

    3. Convenient Features Pincushion By this feature, it enables to adjust left and right side or top and bottom side independently for reforming pincushion distortion. 1. Press the KEYSTONE button with no menu displayed. The KEYSTONE screen will be displayed. • Press the KEYSTONE button when using the remote control. 2. Press the ▼ or ▲ button to select [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM]. 3. Press the ◀ or ▶ button to correct distortion. NOTE: • The [PINCUSHION LEFT/RIGHT] or [PINCUSHION TOP/BOTTOM] item is not available when [KEYSTONE HORIZONTAL], [KEYSTONE VERTICAL] or [CORNERSTONE] is activated. • Before performing correction, set the lens shift to the center position. 4. Press the EXIT when PINCUSHION adjustment is completed.
  • Page 40 3. Convenient Features Reset the keystone and pincushion adjustment to the default value 1. Press the KEYSTONE button with no menu displayed. ON the displayed KEYSTONE menu, set the cursor at RESET using the ▼ button and press ENTER button. • Confirmation message is displayed on. 2. Move the cursor onto YES using either ◀ or ▶ button and then press the ENTER. NOTE: • All adjusted values set in the KEYSTONE adjustment are reset to initial values TIP:...

  • Page 41: ❻ Preventing The Unauthorized Use Of The Projector [Security]

    3. Convenient Features ❻ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro- jector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Security function: 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button twice to select [SETUP] and press the ▼ button or the ENTER button to select [GENERAL]. 3. Press the ▶ button to select [INSTALLATION]. 4.
  • Page 42 3. Convenient Features 7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press the POWER button. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the MENU button. 3. Type in the correct keyword and press the ENTER button. The projector will display an image. NOTE: The security disable mode is maintained until the main power is turned off or unplugging the power cord.
  • Page 43 3. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword, contact your dealer. Your dealer will provide you with your keyword in exchange for your request code. Your request code is displayed in the Keyword Confirmation screen. In this example [NB52-YGK8-2VD6-K585-JNE6-EYA8] is a request code.

  • Page 44: ❼ Operating Your Computer's Mouse Functions From The Projector's Remote Control

    3. Convenient Features ❼ Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function) The built-in remote mouse function enables you to operate your computer’s mouse functions from the supplied remote control when the projector is connected to a computer via a commercially available USB cable (compatible with USB 2.0 specifications). Press the USB-B button on the remote control, or select [USB-B] for the source on the On-screen menu. • Using the USB cable to connect the projector and the computer will also start USB Display function. • When you connect your computer and the projector by a USB cable for the first time, your computer will read in the software. It will take few minutes for starting up the USB display. USB cable (not supplied) NOTE: • A USB cable must support the USB 2.0 Specifications. • The mouse function can be used with the following operating systems: Windows 7, Windows XP, Windows Vista • Wait at least 5 seconds after disconnecting the USB cable before reconnecting it and vice versa. The computer may not identify the USB cable if it is repeatedly connected and disconnected in rapid intervals.

  • Page 45: ❽ Projecting Your Computer's Screen Image From The Projector Via The Usb Cable (Usb Display)

    3. Convenient Features ❽ Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display) Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector for displaying. Power On/Off and source selection of the projector can be done from your computer without connecting a computer cable (VGA). The USB Display utilizes the function of Image Express Utility Lite which is pre-installed software on the projector. NOTE: • To make the USB-Display available on Windows XP, the Windows user account must have “Administrator” privilege. • USB Display will not work in [NORMAL] of [STANDBY MODE]. (→ page 75) 1. Start the computer. 2. Connect the projector’s power cord to the wall outlet and put the projector into standby condition. 3. Use the USB cable to connect the computer with the projector. USB cable (not supplied) →...
  • Page 46 3. Convenient Features 5. Operate the control window. (Source) ����� Selects an input source of the projector� (Picture) ���� Turns on or off AV-MUTE (Picture mute), and turns on or off FREEZE (Freeze a picture)� (Sound) ����� Turns on or off AV-MUTE (Sound mute), play the sound and turns up or down the volume� (Others) �����...

  • Page 47: ❾ Controlling The Projector By Using An Http Browser

    3. Convenient Features ❾ Controlling the Projector by Using an HTTP Browser Overview The HTTP Server function provides settings and operations for: 1. Setting for wired/wireless network (NETWORK SETTINGS) To use wireless LAN connection, the optional USB Wireless LAN Unit is required. (→ page 97) To use wired/wireless LAN connection, connect the projector to the computer with a commercially available LAN cable.

  • Page 48: Handling Of The Address For Operation Via A Browser

    3. Convenient Features Handling of the Address for Operation via a Browser Regarding the actual address that is entered for the address or entered to the URL column when operation of the projector is via a browser, the host name can be used as it is when the host name corresponding to the IP address of the projector has been registered to the domain name server by a network administrator, or the host name cor- responding to the IP address of the projector has been set in the “HOSTS” file of the computer being used. Example 1: W hen the host name of the projector has been set to “pj.nec.co.jp”, access is gained to the network setting by specifying http://pj.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: W hen the IP address of the projector is “192.168.73.1”, access is gained to the network setting by specifying http://192.168.73.1/index.html for the address or the entry column of the URL. PROJECTOR ADJUSTMENT POWER: This controls the power of the projector. ON ������������������������� Power is switched on� OFF ������������������������ Power is switched off�...
  • Page 49 3. Convenient Features PICTURE: Controls the video adjustment of the projector. CONTRAST ▲ �������� Increases the contrast adjustment value� CONTRAST ▼ �������� Decreases the contrast adjustment value� BRIGHTNESS ▲ ���� Increases the brightness adjustment value� BRIGHTNESS ▼ ���� Decreases the brightness adjustment value� SHARPNESS ▲ ����� Increases the sharpness adjustment value� SHARPNESS ▼...

  • Page 50: Network Settings

    3. Convenient Features NETWORK SETTINGS • SETTINGS PIN TYPE Select type of PIN code. ONE-TIME The PIN CODE is automatically created every time powering ON the projector. Created PIN CODE is kept unchanged until the projector is powered OFF. STATIC Enables to set up random number for the PIN CODE. PIN CODE For the case ONE-TIME is selected as PIN TYPE, automatically created PIN CODE is displayed on (disabled to input). For the case STATIC is selected as PIN TYPE, input random 4 digits number as PIN CODE. USE PIN CODE AS PASS- Select if you use the PIN CODE as a security password for connecting to the Multi- WORD FOR MultiPres- Presenter application. For using the PIN code as a security password, add a check enter CONNECTIONG mark into the square. □ �������������������������� USE PIN CODE AS PASSWORD FOR CONNECTING TO MultiPresenter� APPLY Make the settings for PIN effective. WIRED LAN ENABLE Turn on wired LAN connection...
  • Page 51 3. Convenient Features AUTO DNS ON DHCP server will automatically assign IP ADDRESS of DNS server connected to the projector. AUTO DNS OFF Set your IP ADDRESS of DNS server connected to the projector. APPLY Make the settings for wired LAN effective. WIRELESS LAN SMART CONNECTION Easily connect to a computer or a smart phone utilizing the application software, Mul- tiPresenter, installed on them. SIMPLE ACCESS POINT Set the projector as a simple access point for connecting to a computer or a smart phone. INFRASTRUCTURE Connect this device to an access point. DISABLE Turn off wireless LAN connection SETTING Set for wireless LAN. APPLY Connect to the network wirelessly by the selected option among SMART CONNEC- TION, SIMPLE ACCESS POINT, and INFRASTRUCTURE. WIRELESS LAN (SMART CONNECTION) CONNEC- MODE Select wireless frequency band. TION CHANNEL Select wireless channel. SECURITY SECURITY Select if you use the PIN CODE as a security password when STATIC is selected for TYPE PIN TYPE. SECURITY When SECURITY is enabled, set a SECURITY KEY. SECURITY KEY must be 8 to 63 alphanumeric characters (including a space).
  • Page 52 Enter the hostname of the network connected to the projector. A host name must be 16 or less. • ALERT MAIL ALERT MAIL (English This option will notify your computer of lamp replace time or error messages via e-mail only) when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature. Clearing a checkmark will turn off the Alert Mail feature. Sample of a message to be sent from the projector: The lamp and filters are at the end of its usable life. Please replace the lamp and filters. Projector Name: NEC Projector Lamp Hours Used: 100 [H] SENDER’S ADDRESS Enter sender’s address. SMTP SERVER NAME Enter the SMTP server name to be connected to the projector. RECIPIENT’S ADDRESS Enter your recipient’s address. Up to three addresses can be entered. 1,2,3 TEST MAIL Send a test mail to check whether your settings are correct or not NOTE: • If you execute a test, you may not receive an Alert mail. Should this happen, check if network settings are correct.
  • Page 53 3. Convenient Features • NETWORK SERVICE PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if you forget your password, consult with your dealer. HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less. AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system. TIP: When using a device that supports AMX Device Discovery, all AMX NetLinx control system will recognize the device and download the appropriate Device Discovery Module from an AMX server. Placing a checkmark will enable detecting the projector from AMX Device Discovery. Clearing a checkmark will disable detecting the projector from AMX Device Discovery. *What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005. The projector supports all the commands of PJLink Class 1. Setting of PJLink will not be affected even when [RESET] is done from the menu. CRESTRON ROOMVIEW compatibility The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed and controlled from a computer or a controller. For more information, visit http://www.crestron.com <Setting Procedure> Access to the HTTP server, and make necessary settings for [CRESTRON] in [NETWORK SETTINGS]. • ROOMVIEW for managing from the computer. DISABLE Disables ROOMVIEW. ENABLE Enables ROOMVIEW.

  • Page 54: ❿ Projecting An Image From An Angle (Geometric Correction Tool In Image Express Utility Lite)

    3. Convenient Features ❿ Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) The Geometric Correction Tool (GCT) that is a function of the pre-installed software on the projector “Image Express Utility Lite” allows you to correct distortion of images projected even from an angle. What you can do with GCT • The GCT feature includes the following three functions • 4-point Correction: You can fit a projected image within the border of the screen easily by align the four corners of an image to the ones of the screen. • Multi-point Correction: You can correct a distorted image on the corner of a wall or irregular shaped screen by using many separated screens to correct the image as well as 4-point Correction. • Parameters Correction: You can correct a distorted image by using a combination of transformational rules prepared in advance. This section will show an example for use with 4-point Correction.
  • Page 55 3. Convenient Features (In the above example, Windows screens are omitted for clarification.) 4. Drag the selected [ • ] mark to the point you wish to correct and drop it. • When you click somewhere within the project image area, the nearest corner will go to the position where the mouse cursor is. 5. Repeat Step 3 and 4 to correct the distortion of the projected image. 6. After completing, right-click the mouse. The green frame and the mouse pointer will disappear from the projected image area. This will complete the correction.

  • Page 56: Using The Viewer

    4. Using the Viewer ❶ What you can do with the Viewer The Viewer has the following features. • When a commercially available USB memory that stores image files is inserted into the USB port (Type A) of the projector, the Viewer allows you to view the image files on the USB memory. Even if no computer is available, presentations can be conducted simply with the projector. • Supported graphic format is JPEG. • The Viewer displays the thumbnail screen (JPEG Exif only) on which you can jump to any specific image you wish to project. • There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be changed in auto playback. • The order of displaying images can be set by name, date or size. Ascending or descending order can be selected. • Images can be rotated by 90 degrees during playback.
  • Page 57 4. Using the Viewer NOTE • The USB port of the projector does not support USB hub. • The USB port of the projector is common use for the wireless LAN unit. When the wireless LAN unit is installed on, you can not utilize the VIEWER. • The following operations by using the buttons on the projector are not possible when the VIEWER screen such as the slide screen and the thumbnail screen is displayed. Buttons on the cabinet - Keystone correction by using the ▲/▼ button - Auto Adjustment by using the AUTO ADJ. button - Volume control with the ◀ or ▶ button To perform Keystone correction or Source selection during display of the Viewer, press the MENU button twice to display the menu and operate Viewer from the menu. Remote control - Auto Adjustment button - Freeze button • Executing [RESET] → [ALL DATA] from the menu will return the settings for the Viewer toolbar to the factory default. • USB memory - Be sure to use a USB memory device formatted with the FAT32 or FAT16 file system. The projector does not support NTFS formatted USB memory. If the projector does not recognize your USB memory, check if the format is supported. To format your USB memory in your computer, refer to the document or help file that comes with your Windows. - We do not warrant that the USB port of the projector will support all USB memories in the market.

  • Page 58: ❷ Projecting Images Stored In A Usb Memory Device

    4. Using the Viewer ❷ Projecting images stored in a USB memory device This section explains the basic operation of the Viewer. The explanation provides the operational procedure when the Viewer toolbar (→ page 51) is set to the factory default. - Starting the Viewer ...............below - Removing the USB memory from the projector ....... page 49 - Exiting the Viewer ..............page 49 Preparation: Before starting the Viewer, store images to the USB memory using your computer. Starting the Viewer 1. Turn on the projector. (→ page 12) 2. Insert the USB memory into the USB port of the projec- tor.
  • Page 59 4. Using the Viewer 4. Press the ENTER button. The thumbnail screen will be displayed. (→ page 50) 5. Use the ▲▼◀ or ▶ button to select an icon. • The → (arrow) symbol on the right indicates there are more pages.

  • Page 60: Exiting The Viewer

    4. Using the Viewer Removing the USB memory from the projector 1. Select the VIEWER start screen. Press the EXIT button with no menu displayed. 2. Remove the USB memory from the projector. Make sure that the LED on the USB memory is not flashing before removing the USB memory. NOTE: If you remove the USB memory from the projector with a slide displayed, the projector may not operate correctly. If this happens, turn off the projector and unplug the power cord. Wait 3 minutes, then connect the power cord, and turn on the projector. Exiting the Viewer 1. Press the MENU button with the slide screen or the thumbnail screen displayed.
  • Page 61 (11) Slideshow screen (10) (12) Name Description (1) Viewer start screen This screen will be displayed first when you select the Viewer. (2) USB icon This icon indicates that the USB memory is inserted into the projector. (3) Thumbnail screen This screen will show a list of folders and image files stored in the USB memory. The JPEG Exif files will be displayed in thumbnail screen only. • The maximum number of image files or folders within one page is different depending on the model. ME401W/ME361W/ME331W/ME301W are (6 × 4 lateral by longitudinal) ME401X/ME361X/ME331X/ME301X are (5 × 4 lateral by longitudinal) (4) Cursor The cursor is used to select (highlight) the folder or image file by using ▲▼◀▶ button. (5) Back icon This icon is used to return to the upper (parent) folder. (6) Folder icon This icon shows that the USB memory has folders. (7) P age up (Page down) This icon shows further folders or image files are available in the next (previous) page. Use the ▶ button to go to the next (previous) row. The PAGE ▽ or PAGE △ on the icon remote control is used to go to the next or previous page directly. (8) Thumbnail toolbar This toolbar is used in the thumbnail screen. Pressing the MENU button will display this toolbar. (→ page 51)

  • Page 62: Using The Toolbar

    4. Using the Viewer Using the toolbar 1. Press the MENU button. The toolbar will be displayed. The SOURCE screen will be displayed as Viewer connection screen. 2. Use the ◀ or ▶ button to select an item and use the ▲ or ▼ button to select its available option. When the cursor is placed, the selected item will be changed to yellow.
  • Page 63 4. Using the Viewer Slide toolbar Menu Options Description (1) Display Closes the menu and switches to the slide screen. Closes the menu and displays the thumbnail screen. Closes the menu and starts the slideshow from the highlighted item. (2) I mage Closes the menu and displays the image in its actual size. display Closes the menu and displays the image in the projector’s maximum reso- lution. (3) C lockwise — Close the menu and rotate the image 90°clockwise rotation (4) C ounter- — Close the menu and rotate the image 90°counter clockwise clockwise rotation Slideshow toolbar Menu Options Description (1) Stop — Closes the menu and changes to the slide screen. (2) Back —...

  • Page 64: Using On-Screen Menu

    5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation. 2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu. 3.

  • Page 65: ❷ Menu Elements

    5. Using On-Screen Menu ❷ Menu Elements Slide bar Solid triangle Available buttons Source Highlight Radio button Wireless symbol ECO mode symbol Off Timer remaining High Altitude symbol time Thermometer symbol Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item� Solid triangle ����������������������Indicates further choices are available�...

  • Page 66: ❸ List Of Menu Items

    HORIZONTAL VERTICAL OVERSCAN AUTO, 0[%], 5[%], 10[%] IMAGE OPTIONS ME401W/ME361W/ME331W/ME301W: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVE ASPECT RATIO ME401X/ME361X/ME331X/ME301X: AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE POSITION (Not available on ME401W/ME361W/ ME331W/ME301W) AUDIO VOLUME 0–31 AUTO KEYSTONE OFF, ON...
  • Page 67 RGB/ COMPUTER RGB/COMPONENT, RGB, COMPONENT COMPONENT SIGNAL SELECT VIDEO AUTO AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM ME401W/ME361W/ ME331W/ME301W: WXGA MODE OFF, ON ME401X/ME361X/ ME331X/ME301X: SETUP OPTIONS(1) DEINTERLACE OFF, ON HDMI1 VIDEO LEVEL AUTO AUTO, NORMAL, ENHANCED HDMI SETTINGS...
  • Page 68 5. Using On-Screen Menu Menu Item Default Options LAMP LIFE REMAINING LAMP HOURS USED USAGE TIME FILTER HOURS USED TOTAL CARBON SAVINGS TOTAL COST SAVINGS SOURCE NAME SOURCE INDEX HORIZONTAL FREQUENCY SOURCE(1) VERTICAL FREQUENCY SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON VIDEO SYNC POLARITY SCAN TYPE SIGNAL TYPE...

  • Page 69: ❹ Menu Descriptions & Functions [Source]

    5. Using On-Screen Menu ❹ Menu Descriptions & Functions [SOURCE] HDMI1 and HDMI2 Selects the HDMI compatible equipment connected to your HDMI1 or 2 IN terminal. COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER]. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera. USB-A This feature enables you to make presentations using a USB memory that contains slides. (→ page 45 “4. Using the Viewer”) Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional). USB-B Selects the computer connected to the USB(PC) port (type B) by using a commercially available USB cable. (→ page 34)

  • Page 70: ❺ Menu Descriptions & Functions [Adjust]

    5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 7]. HIGH-BRIGHT �������� Recommended for use in a brightly lit room� PRESENTATION ����� Recommended for making a presentation using a PowerPoint file� VIDEO �������������������� Recommended for typical TV program viewing� MOVIE �������������������...
  • Page 71 5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA- TURE]. HIGH-BRIGHT �������� Recommended for use in a brightly lit room� PRESENTATION ����� Recommended for making a presentation using a PowerPoint file� VIDEO �������������������� Recommended for typical TV program viewing� MOVIE ������������������� Recommended for movies� GRAPHIC ���������������...
  • Page 72 5. Using On-Screen Menu Enhancing the Color [COLOR ENHANCEMENT] This function allows you to enhance the color of image. ON ������������������������� Enhances the color� NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE]. Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/− green to +/− blue. The red level is used as reference. Input signal CONTRAST BRIGHTNESS SHARPNESS COLOR COMPUTER/HDMI (RGB) COMPUTER/HDMI (COMPONENT) USB-B VIDEO USB-A/LAN Yes = Adjustable, No = Not adjustable [RESET] The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following;...

  • Page 73: [Image Options]

    5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal banding in the image� This adjustment may be necessary when you connect your computer for the first time�...
  • Page 74 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments. Selecting Overscan Percentage [OVERSCAN] Select overscan percentage (AUTO, 0%, 5% and 10%) for signal. Projected image Overscaned by 10% NOTE: • The [0[%]] cannot be selected when VIDEO signal is used. • The [OVERSCAN] item is not available: - when [NATIVE] is selected for [ASPECT RATIO].
  • Page 75 The image of a letterbox signal is stretched equally in the horizontal and vertical direc- (ME401W/ME361W/ tions to fit the screen. Parts of the displayed image are cropped at the top and bottom ME331W/ME301W) edges and therefore not visible. NATIVE The projector displays the current image in its true resolution when the incoming computer signal has a lower resolution than the projector’s native resolution. [Example 1] When the incoming signal with the resolution of 800 × 600 is displayed on the ME401W/ ME361W/ME331W/ME301W: [Example 2] When the incoming signal with the resolution of 800 × 600 is displayed on the ME401X/ ME361X/ME331X/ME301X: NOTE: • When a non-computer signal is displayed, the [NATIVE] is not available. • When a signal with a higher resolution than the projector’s native resolution is displayed, [NA- TIVE] is not available.
  • Page 76 5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined ME401X/ME361X/ME331X/ME301X [Computer signal] Aspect ratio of incoming signal 16:9 15:9 16:10 Sample image when the appro- priate aspect ratio is automati- cally determined [Video signal] Aspect ratio of incoming signal Letterbox Squeeze Sample image when the aspect ratio is automatically determined NOTE: To display a squeezed signal prop- erly, select [16:9] or [WIDE ZOOM]. ME401W/ME361W/ME331W/ME301W [Computer signal] Aspect ratio of incoming signal 16:9 15:9 16:10 Sample image when the appro- priate aspect ratio is automati-...

  • Page 77: [Audio]

    5. Using On-Screen Menu [AUDIO] Turning Up or Down Sound Adjusts the volume of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: • When no menus appear, the ◀ and ▶ buttons on the projector cabinet and the VOL. +/− buttons on the remote control work as a volume control. (→ page 20)

  • Page 78: ❻ Menu Descriptions & Functions [Setup]

    5. Using On-Screen Menu ❻ Menu Descriptions & Functions [SETUP] [GENERAL] Enabling Auto Keystone [AUTO KEYSTONE] This feature allows the projector to detect its tilt and correct vertical distortion automatically. To turn on the AUTO KEYSTONE feature, select [ON]. To adjust the KEYSTONE feature manually, select [OFF]. NOTE: • The [AUTO KEYSTONE] function is not available when an orientation type such as [CEILING REAR], [DESKTOP REAR], [CEILING FRONT] other than [DESKTOP/FRONT] is selected for [ORIENTATION]. • While the [AUTO KEYSTONE] is [ON], the following functions are not available, [PINCUSHION LEFT/RIGHT], [PIN CUSHION TOP/ BOTTOM], and [CORNERSTONE]. • Adjustable angle range by the [AUTO KEYSTONE] is approx. 30 degrees in vertical direction. • During projecting image, [AUTO KEYSTONE] will be started to perform approx. 2 seconds after fixing the throw angle . Correcting Keystone Distortion Manually [KEYSTONE] You can correct horizontal or vertical keystone, pincushion LEFT/RIGHT or TOP/BOTTOM, or cornerstone distortion manually. NOTE: • [KEYSTONE HORIZONTAL] and [KEYSTONE VERTICAL] can be adjusted at once. • To change from one item to another item, reset the first item. • Adjustment values will be overwritten. They will not be deleted even when the projector is turned off. • Using [KEYSTONE], [PINCUSHION] and [CORNERSTONE] correction can cause the image to be slightly blurred because the correction is made electronically. • When the [AUTO KEYSTONE] has been [ON]. it automatically performs vertical keystone correction every time the projector is powered on.
  • Page 79 5. Using On-Screen Menu TIP: • Adjustable angle range in horizontal and vertical direction in the cornerstone and the keystone corrections: Approx. 30 degrees (Max) - Depending on input signal, the adjustable range may be narrower. Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] The ECO MODE increases lamp life, while lowering power consumption and cutting down on CO emissions. Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes. (→ page 24)

  • Page 80: [Menu]

    5. Using On-Screen Menu Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video. OFF ������������������������ This exits the closed caption mode� CAPTION 1-4 ��������� Text is superimposed� TEXT 1-4 ���������������� Text is displayed� NOTE: • The closed caption is not available under the following conditions: - when messages or menus are displayed. - when an image is magnified, frozen, or muted. • Portions of superimposed text or closed caption may be truncated. If that happens, try to place the superimposed text or closed caption within the screen. Using Off Timer [OFF TIMER] 1.
  • Page 81 5. Using On-Screen Menu Turning ON/OFF Control ID [ID DISPLAY] This option turns on or off the ID number which is displayed when the ID SET button on the remote control is pressed. Turning On / Off Eco Message [ECO MESSAGE] This option turns on or off the following messages when the projector is turned on. The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message to prompt you to select [AUTO ECO], [NORMAL], or [ECO] for [ECO MODE]. When [AUTO ECO], [NORMAL], or [ECO] is selected for [ECO MODE] To close the message, press any one of the buttons. The message will disappear if no button operation is done for 30 seconds. When [OFF] is selected for [ECO MODE] Pressing the ENTER button will display the [ECO MODE] screen. (→ page 24) To close the message, press the EXIT button. Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE]. NOTE: • If the [LOGO] item is selected for [BACKGROUND] with the [LAN] or [USB-B] source selected, the [BLUE] item will be selected regardless of its selection. • When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed at the center of the screen regardless of its selection. • Your setting will not be affected even when [RESET] is done from the menu. Selecting Interval Time for Filter Message [FILTER MESSAGE] This option allows you to select the time preference between displaying the message for cleaning the filters. Clean the filter when you get the message “PLEASE CLEAN THE FILTER.” (→ page 100)

  • Page 82: [Installation]

    5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions. • When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change the setting to [OFF]. TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu. Enabling Security [SECURITY] This feature turns on or off the SECURITY function. Unless the correct keyword is entered, the projector cannot project an image. (→ page 30) NOTE: Your setting will not be affected even when [RESET] is done from the menu.
  • Page 83 5. Using On-Screen Menu Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu. Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control. To do so, you have to assign an ID number to each projector. CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector� CONTROL ID �����������������������Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID setting� NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.)

  • Page 84: [Options(1)]

    5. Using On-Screen Menu Using Test Pattern [TEST PATTERN] Displays the test pattern to check for image distortion at the time of the projector setup. Press the ENTER button to display the test pattern; press the EXIT button to close the test pattern and return to the menu. Menu operation and corrections for keystone, cornerstone and pincushion are not available when the test pattern is displayed. [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ������������������������ The computer signal will not be automatically adjusted� You can manually optimize the computer signal� NORMAL ���������������� Default setting� The computer signal will be automatically adjusted� Normally select this option� FINE �����������������������...
  • Page 85 In the case where the projector has difficulty detecting the video standard, select the appropriate video standard from the menu. Enabling or Disabling WXGA Mode [WXGA MODE] Selecting [ON] will give priority to WXGA (1280 × 768)/WUXGA (1920 × 1200) signals in recognizing an input signal. When [WXGA MODE] is set to [ON], XGA (1024 × 768)/UXGA (1600 × 1200) signals may not be recognized on ME401X/ME361X/ME331X/ME301X. In this case, select [OFF]. NOTE: • [OFF] is selected at the time of shipment of ME401X/ME361X/ME331X/ME301X. • [ON] is selected at the time of shipment of ME401W/ME361W/ME331W/ME301W. Enabling the deinterlace [DEINTERLACE] Turns on or off the deinterlace function for a telecine signal. OFF ������������������������ Select this option if there is any jitter or artifacts in video� ON ������������������������� Default standard setting� NOTE: This feature is not available for HDTV (progressive) and computer signals. Setting HDMI1 & HDMI2 [HDMI SETTINGS] Make the settings for each video level when connecting HDMI1 equipment such as a DVD player.

  • Page 86: [Options(2)]

    5. Using On-Screen Menu Enabling Key Sound and Error Sound [BEEP] This feature turns on or off the button sound or alarm when an error occurs or the following operations are performed. - Displaying the main menu - Switching sources - Resetting data by using [RESET] - Pressing POWER ON or STANDBY button TIP: • Volume control for {BEEP] is disabled. AV-MUTE button is not effective to stop beeping sound. If you want to activate BEEP func- tion, set [BEEP] to [OFF]. [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has two standby modes: [NORMAL] and [NETWORK STANDBY]. The NORMAL mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NETWORK STANDBY mode. NORMAL �����������������������������POWER indicator: Red light/STATUS indicator: Off When [NORMAL] is selected, only the following buttons and feature will work: POWER buttons on the projector cabinet and the remote control, AUTO POWER ON, and powering on from PC Control command�...
  • Page 87 5. Using On-Screen Menu Enabling Direct Power On [DIRECT POWER ON] Turns the projector on automatically when the power cord is inserted into an active power outlet. This eliminates the need to always use the POWER button on the remote control or projector cabinet. Turning On the Projector By Applying Computer Signal [AUTO POWER ON] When the projector is in Standby mode, applying a computer or HDMI signal from a computer connected to the COM- PUTER IN input, HDMI1, or HDMI2 input will power on the projector and simultaneously project the image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector. To use this function, first connect a computer to the projector and the projector to an active AC input. NOTE: • Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in com- bination of the AUTO POWER OFF function. • This function will not be available under the following conditions: - when a component signal is applied to the COMPUTER IN terminal - when a Sync on Green RGB signal or composite sync signal is applied • To enable the AUTO POWER ON after turning off the projector, wait 5 seconds and input a computer or HDMI signal. If a computer or HDMI signal is still present when the projector is turned off, the AUTO POWER ON will not work and the projector remains in standby mode. • Depending on the projector in use, the AUTO POWER ON may not work properly. In this case, set [STANDBY MODE] to [NETWORK STANDBY]. Enabling Power Management [AUTO POWER OFF] When this option is selected you can enable the projector to automatically turn off (at the selected time: 0:05, 0:10, 0:15, 0:20, 0:30, 1:00) if there is no signal received by any input or if no operation is performed.
  • Page 88 5. Using On-Screen Menu Selecting Default Source [DEFAULT SOURCE SELECT] You can set the projector to default to any one of its inputs each time the projector is turned on. LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on� AUTO ��������������������� Searches for an active source in order of HDMI1 → HDMI2 → COMPUTER → VIDEO → USB-A → COM- PUTER and displays the first found source�...

  • Page 89: Setting Up The Projector For A Wired Lan Connection [Wired Lan]

    5. Using On-Screen Menu Setting up the Projector for a Wired LAN Connection [WIRED LAN] Important • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the pro- jector. (→ page 96) TIP: The network settings you make will not be affected even when [RESET] is done from the menu. [WIRED LAN] [DISABLE] Wired LAN connection will be turned off. [ENABLE] Wired LAN connection will be turned on. ON �������������������������� IP address, subnet mask, and gateway will [SETTINGS] [DHCP] be automatically assigned to the projector from your DHCP server�...

  • Page 90: Setting Up The Projector For A Wireless Lan Connection (With The Optional Usb Wireless Lan Unit Equipped) [Wirless Lan]

    5. Using On-Screen Menu Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless LAN Unit equipped) [WIRLESS LAN] Important • Consult with your network administrator about these settings. • When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 97) • Perform detail settings for wireless LAN on the HTTP server screen. [PROFILE] [DISABLE] Wireless LAN connection will be turned off [SIMPLE ACCESS Set the projector as [SIMPLE ACCESS POINT] for con- POINT] necting to a computer and a smart phone. [SMART CONNECTION] Easily connect to a computer and a smart phone utilizing the application software, MultiPresenter, installed on them. [INFRASTRUCTURE] Connect the projector to an access point.
  • Page 91 5. Using On-Screen Menu Hints on How to Set Up LAN Connection To connect a DHCP server: From the projector menu, select [SETUP] → [WIRED LAN] → [SETTINGS] → [DHCP] → [ON] and press the ENTER button. To specify IP address without using the DHCP server, use the HTTP server. (→ page 39) To set only for wireless LAN (NETWORK TYPE and WPA2 PSK): Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET- TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY]. Make necessary settings for [SETTINGS], click [SAVE] for storing set values and then click [APPLY] to reflect these values to wireless LAN connection. To select an SSID: Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [SET- TINGS] → [WIRELESS LAN] → [INFRASTRUCTURE] and then click [APPLY]. After completion of these steps, click [SETTING] for the INFRASTRUCTURE and then click [SITE SURVEY] on the [CONNECTION] page, finally select the SSID you want to connect on the list. If you do not use [SITE SURVEY], type the SSID in [CONNECTION]. (→ page 40) To receive lamp replacement time or error messages via e-mail: Access the HTTP server to display the web browser (→ page 36) and select [NETWORK SETTINGS] → [ALERT MAIL], and set [SENDER’S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT’S ADDRESS]. Last, click [SAVE]. (→ page 41)

  • Page 92: ❼ Menu Descriptions & Functions [Info.]

    5. Using On-Screen Menu ❼ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has six pages. The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [FILTER HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) [TOTAL COST SAVINGS] * The progress indicator shows the percentage of remaining bulb life. The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE REMAINING bar indicator changes from 0% to 100 Hours and starts counting down. If the remaining lamp time reaches 0 hours, the projector will not turn on. • The message to the effect that the lamp or the filters should be replaced will be displayed for one minute when the projector is turned on and when the POWER button on the projector or the remote control is pressed. To dismiss this message, press any button on the projector or the remote control. Lamp life(H) ECO MODE Replacement lamp OFF/AUTO ECO NORMAL 4000 5000 9000 NP43LP • [TOTAL CARBON SAVINGS] This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition). (→ page 25)

  • Page 93: [Source(1)]

    5. Using On-Screen Menu [SOURCE(1)] [SOURCE NAME] [SOURCE INDEX] [HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY] [SYNC TYPE] [SYNC POLARITY] [SCAN TYPE] [SOURCE(2)] [SIGNAL TYPE] [VIDEO TYPE] [BIT DEPTH] [VIDEO LEVEL] [WIRED LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS]...

  • Page 94: [Wireless Lan]

    5. Using On-Screen Menu [WIRELESS LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS] [SSID] [NETWORK TYPE] [SECURITY] [CHANNEL] [SIGNAL LEVEL] [CONNECTION] [PROJECTOR NAME] [PIN CODE] [WIRED LAN] [IP ADDRESS] [WIRELESS LAN] [IP ADDRESS] [SSID] [SECURITY KEY] [VERSION] [FIRMWARE] Version [DATA] Version...

  • Page 95: [Others]

    5. Using On-Screen Menu [OTHERS] [PROJECTOR NAME] [HOST NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [CONTROL ID] is set)

  • Page 96: ❽ Menu Descriptions & Functions [Reset]

    5. Using On-Screen Menu ❽ Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN]. [ALL DATA] Reset all the adjustments and settings for all the signals to the factory preset. All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [ORIENTATION], [FILTER MESSAGE], [SECU- RITY], [COMMUNICATION SPEED], [CONTROL ID], [STANDBY MODE], [FAN MODE], [CARBON CONVERT], [CURRENCY], [CURRENCY CONVERT], [LAMP LIFE REMAINING], [LAMP HOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and [WIRELESS LAN]. To reset the lamp usage time, see “Clearing Lamp Hour Meter [CLEAR LAMP HOURS]” below. Clearing Lamp Hour Meter [CLEAR LAMP HOURS] Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu. NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.

  • Page 97: Installation And Connections

    6. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: ① Set up a screen and the projector. ② Connect your computer or video equip- ment to the projector. (→ page 90, 92, 93, 94, 95, 96, 97) ③ Connect the supplied power cord. (→ page 11) NOTE: Ensure that the power cord and any other cables are disconnected before moving the pro- jector. When moving the projector or when it is not in use, cover the lens with the sliding lens cover. To the wall outlet. ❶ Setting Up the Screen and the Projector Selecting a Location [ME401W/ME361W/ME331W/ME301W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 25" (0.64 m) measured diagonally when the projector is roughly 37 inches (0.9 m) from the wall or screen.
  • Page 98 6. Installation and Connections [ME401X/ME361X/ME331X/ME301X] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 25" (0.64 m) measured diagonally when the projector is roughly 35 inches (0.9 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 435 inches (11.0 m) from the wall or screen. Screen Size (Unit: cm/inch) 609�6(W) × 457�2(H) / 240(W) × 180(H) Screen Size 0 " 487�7(W) × 365�8(H) / 192(W) × 144(H) 0 " 406�4(W) × 304�8(H) / 160(W) × 120(H) 0 "...

  • Page 99: Throw Distance And Screen Size

    6�5 6858 5816 3635 1499 7865 13103 -318 10�8 6�5 7620 6462 4039 1666 8744 14564 -353 10�8 6�5 [ME401X/ME361X/ME331X/ME301X] Screen Size α Diagonal Width Height wide tele wide tele inch inch inch inch inch inch inch degree degree 1106 11�4...
  • Page 100 6. Installation and Connections WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C). • Do not expose the projector to moisture, dust, or smoke. This will harm the screen image. • Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector. Reflecting the Image Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and ▲▼◀▶ buttons on your projector cabinet or your remote control to correct the orienta-...

  • Page 101: ❷ Making Connections

    6. Installation and Connections ❷ Making Connections Connecting Your Computer Computer cables, HDMI and USB can be used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. NOTE: Signals supported by Plug & Play (DDC2) INPUT COMPUTER IN HDMI 1 IN HDMI 2 IN analog digital digital HDMI cable (not supplied) Use High Speed HDMI® Cable. HDMI 1 IN HDMI 2 IN COMPUTER IN AUDIO IN NOTE: For Mac, use a commercially available pin adapter (not supplied) to connect to your Mac’s video port. Type B A commercially available USB cable Stereo mini-plug audio cable (not supplied) (compatible with USB 2.0...
  • Page 102 6. Installation and Connections NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet. Enabling the computer’s external display Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. Cautions when using a DVI signal • When the computer has a DVI output terminal, use a commercially available converter cable to connect the computer to the projector’s HDMI 1 or HDMI 2 input terminal (only digital video signals can be input). HDMI 1 IN HDMI 2 IN AUDIO IN NOTE: When Viewing a DVI Digital Signal • Turn off the power of the computer and projector before connecting. • When a video deck is connected via a scan converter, etc., the display may not be correct during fast-forwarding and rewinding. • Use a DVI-to-HDMI cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 stan- dard. The cable should be within 197"/5 m long.

  • Page 103: Connecting An External Monitor

    6. Installation and Connections Connecting an External Monitor AUDIO OUT MONITOR OUT (COMP.) Computer cable (VGA) (supplied) Computer cable (VGA) (not supplied) Stereo mini-plug audio cable (not supplied) Stereo mini-plug audio cable (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: • The AUDIO OUT jack does not support headphone terminal. • When audio equipment is connected, the projector speaker is disabled. • The signal output from the MONITOR OUT (COMPUTER) of this projector is for projecting image on exclusive one display.

  • Page 104: Connecting Your Dvd Player Or Other Av Equipment

    6. Installation and Connections Connecting Your DVD Player or Other AV Equipment Connecting Video Input VIDEO IN AUDIO IN Audio cable (not supplied) Video cable (not sup- plied) Audio equipment Audio cable (not supplied) • Select the source name for its appropriate input terminal after turning on the projector. SOURCE button on the projector Input terminal Button on the remote control cabinet VIDEO IN (VIDEO) VIDEO NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements.

  • Page 105: Connecting Component Input

    6. Installation and Connections Connecting Component Input COMPUTER IN AUDIO IN 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) Stereo mini plug - to - RCA audio cable (not supplied) Audio Equipment Component video RCA × 3 cable (not supplied) DVD player Audio cable (not supplied) A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] →...

  • Page 106: Connecting Hdmi Input

    6. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN terminal of your projector. HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI® Cable. Audio cable (not supplied) • Select the source name for its appropriate input terminal after turning on the projector. SOURCE button on the projector Input terminal Button on the remote control cabinet HDMI 1 IN HDMI1 (HDMI1*) HDMI 2 IN HDMI2 (HDMI2*) • When connecting the HDMI1 IN terminal (or HDMI2 terminal) of the projector to the DVD player, the projector’s video level can be made settings in accordance with the DVD player’s video level. In the menu select [HDMI SET- TINGS] → [VIDEO LEVEL] and make necessary settings. • If the HDMI input sound cannot be heard, in the menu select [AUDIO SELECT] → [HDMI1] or [HDMI2]. (→ page...

  • Page 107: Connecting To A Wired Lan

    6. Installation and Connections Connecting to a Wired LAN The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. To use a LAN connection, you are required to set the LAN on the projector menu. Select [SETUP] → [WIRED LAN]. (→ page 78). Example of LAN connection (1) Server LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable. Example of LAN connection (2) Via an wireless LAN access point, it enables to easily connect to terminals by SMART CONNECTION. Wireless access point Wired LAN...

  • Page 108: Connecting To A Wireless Lan (Optional: Np05Lm Series)

    6. Installation and Connections Connecting to a Wireless LAN (Optional: NP05LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: • If you use the projector with the USB Wireless LAN Unit in the area where the use of wireless LAN equipment is prohibited, remove the USB Wireless LAN Unit from the projector. • Buy the appropriate USB Wireless LAN Unit for your country or area. NOTE: • The green LED on the USB Wireless LAN Unit flashes to show that the USB Wireless LAN Unit is working. • Your computer’s wireless LAN adapter (or unit) must be complied with Wi-Fi (IEEE802.11b/g/n) standard. Attaching the USB Wireless LAN Unit NOTE: • The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB port may break. • Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge the static electricity from your body. • Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect the power cord, and then connect it again.
  • Page 109 Easily connect the projector to multiple terminals as computers and smart phones by PIN code. 1. Download the application software, “MultiPresenter” from our company web site and install it onto each terminal as a computer. http://www.nec-display.com/dl/en/soft/multipresenter/index.html 2. Power ON the projector and display on the on-screen menu and then select as the bellows in order: [SETUP] → [WIRELESS LAN] → [SMART CONNECTION] for [PROFILE] 3. Switch the source of the projector to [LAN].
  • Page 110 6. Installation and Connections Connection Example (3) [INFRASTRUCTURE] Connect the projector to wired/wireless LAN via wireless LAN access point. Wireless access point Wired LAN 1. Connect a computer to the projector via wired LAN. (→ page 96) 2. Use the computer’s browser to display the projector’s HTTP server. (→ page 36) 3. Use an HTTP server to set the wireless LAN. (→ page 40) Select either [SIMPLE ACCESS POINT] or [INFRASTRUCTURE] for [WIRELESS] in [SETTINGS] of [NETWORK SETTINGS] and then perform detail settings in [SETTING]. 4. Click [APPLY] to connect to the wireless LAN. NOTE: • To use the HTTP server function, the projector must be connected to a network. First, connect the projector to a network by the wired LAN and then perform required settings for the wireless LAN on the HTTP server. • If network conflict is occurred, the STATUS Indicator starts to blink in orange. In this case, change the IP address. If you want to change the wireless LAN setting on the projector after setting it on the HTTP server, perform setting change on the on-screen menu. (→ page 79)

  • Page 111: Maintenance

    7. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters, the lens, the cabinet, and to replace the lamp and the filters. ❶ Cleaning the Filters The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the filter is dirty or clogged, your projector may overheat. WARNING • Please do not use a spray containing flammable gas to remove dust attached to the filters, etc. Doing so may result in fires. NOTE: The message for filter cleaning will be displayed for one minute after the projector is turned on or off. When the message is displayed, clean the filters. The time to clean the filters is set to [5000 H] at time of shipment. To cancel the message, press any button on the projector cabinet or the remote control. The two-layer filter on the projector improves cooling and dust-proof capabilities compared with the conventional models. The outsides (intake side) of the first and second layer filters remove dust. To clean the filter, detach the filter unit and the filter cover. CAUTION • Before cleaning the filters, turn off the projector, disconnect the power cord and then allow the cabinet to cool. Failure to do so can result in electric shock or burn injuries. 1. Push two buttons to release the filter unit and pull it out. TIP: The following explanation uses filters (fine-texture sponge and coarse- Button texture sponge) attached to the projector at the time of purchase as an example.
  • Page 112 7. Maintenance 4. Remove dust from the filter unit and the filter cover. Clean both outside and inside. Coarse-texture 5. Attach the four filters to the filter unit and the filter cover. sponge Filter unit: Attach two coarse-texture sponge filters (large and small) to the filter unit.

  • Page 113: ❷ Cleaning The Lens

    7. Maintenance ❷ Cleaning the Lens • Turn off the projector before cleaning. • The projector has a plastic lens. Use a commercially available plastic lens cleaner. • Do not scratch or mar the lens surface as a plastic lens is easily scratched. • Never use alcohol or glass lens cleaner as doing so will cause damage to the plastic lens surface. WARNING • Please do not use a spray containing flammable gas to remove dust attached to the lens, etc. Doing so may result in fires. ❸ Cleaning the Cabinet Turn off the projector, and unplug the projector before cleaning. • Use a dry soft cloth to wipe dust off the cabinet. If heavily soiled, use a mild detergent. • Never use strong detergents or solvents such as alcohol or thinner. • When cleaning the vents or the speaker using a vacuum cleaner, do not force the brush of the vacuum cleaner into the slits of the cabinet. Vacuum the dust off the vents. • Clogged vents may cause a rise in the internal temperature of the projector, resulting in malfunction.

  • Page 114: ❹ Replacing The Lamp And The Filters

    • Use the specified lamp for safety and performance. To order the replacement s, specify your lamp type, NP43LP. NP16LP is also available If you have. The replacement lamp comes with filters. • DO NOT REMOVE ANY SCREWS except one lamp cover screw and two lamp housing screws. You could receive an electric shock. • Do not break the glass on the lamp housing. Keep finger prints off the glass surface on the lamp housing. Leaving finger prints on the glass surface might cause an unwanted shadow and poor picture quality. • The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the lamp has reached the end of its life. If this happens, be sure to replace the lamp. If you continue to use the lamp after the lamp reaches the end of its life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury. If this happens, contact your NEC dealer for lamp replacement. *NOTE: This message will be displayed under the following conditions: • for one minute after the projector has been powered on • when the (POWER) button on the projector cabinet or the POWER OFF button on the remote control is pressed To turn off the message, press any button on the projector cabinet or the remote control. Optional lamp and tools needed for replacement: • Phillips screwdriver (plus-head) • Replacement lamp Flow of Replacing the Lamp and the Filters Step 1.
  • Page 115 7. Maintenance To replace the lamp: 1. Remove the lamp cover. (1) L oosen the lamp cover screw • The lamp cover screw is not removable. (2) P ush and slide the lamp cover off. 2. Remove the lamp housing. (1) L oosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi- tion. • The two screws are not removable. • T here is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock. (2) R emove the lamp housing by holding it. CAUTION: Make sure that the lamp housing is cool enough before removing it. Interlock...
  • Page 116 7. Maintenance 3. Install a new lamp housing. (1) I nsert a new lamp housing until the lamp housing is plugged into the socket. (2) P ush the top center of the lamp housing to secure it. (3) S ecure it in place with the two screws. • Be sure to tighten the screws. 4. Reattach the lamp cover. (1) S lide the lamp cover back until it snaps into place. (2) T ighten the screw to secure the lamp cover. • Be sure to tighten the screw. This completes the lamp replacement. Go on to the filter replacement. NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector cannot turn on and the menu is not displayed.
  • Page 117 7. Maintenance To replace the filters: Four filters are packaged with the replacement lamp, NP43LP. Coase texture sponge filter: Large and small sizes (attached to the filter unit) Fine texture sponge filter: Large and small sizes (attached to the filter cover) The filter supplied with NP16LP is differed from ones’ material supplied with NP43LP and that material is non-woven material. For reading the filter replacement procedures, replace the words “fine-texture sponge and coarse-texture sponge” with “accordion soft and honeycomb hard” respectively. NOTE: • Replace all four filters at the same time. • Before replacing the filters, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement. • Do not wash the filters with soap and water. Soap and water will damage the filter membrane. • Put filters into place. Incorrect attachment of a filter may cause dust and dirt to get into the inside of the projector. TIP: While the material of filters attached to the projector at the time of purchase is different from the material of filters included with the optional lamp, there is no difference in performance between these two types. Before replacing the filters, replace the lamp. (→ page 103) 1. Push the catch to release the filter unit and pull it out. 2.
  • Page 118 7. Maintenance 2. Attach new filters. Filter unit: Attach two coarse texture sponge filters to the filter unit. Filter cover: Attach two fine texture sponge filters to the filter cover. The accordion filter has slits on it. Align these slits with the protrusions of the filter cover.

  • Page 119: Appendix

    8. Appendix ❶ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Projector Condition Note The main power is off – Blinking light Blue 0�5 sec On, The projector is getting ready to turn on� Wait for a moment� 0�5 sec Off 2�5 sec On, Off Timer is enabled�...

  • Page 120: Common Problems & Solutions

    8. Appendix Common Problems & Solutions (→ “Power/Status/Lamp Indicator” on page 108.) Problem Check These Items Does not turn on or • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control shut down is on� (→ pages 11, 12) • Ensure that the lamp cover is installed correctly. (→ page 105) • Check to see if the projector has overheated. If there is insufficient ventilation around the projector or if the room where you are presenting is particularly warm, move the projector to a cooler location� • Check to see if you continue to use the projector for another 100 hours after the lamp has reached the end of its life�...

  • Page 121: If There Is No Picture, Or The Picture Is Not Displayed Correctly

    If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this means there is no signal being output from the computer. (→ page 82 or go to next step) • Enabling the computer’s external display. Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usu- ally, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. • Non-standard signal output from the computer If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this happen, deactivate the notebook PC’s LCD screen when the projector display is in use. Each notebook PC has a different way of deactivate/reactivate the local LCD screens as described in the previous step. Refer to your computer’s documentation for detailed information. • Image displayed is incorrect when using a Mac When using a Mac with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) ac- cording to your resolution. After setting, restart your Mac for the changes to take affect. For setting display modes other than those supported by your Mac and the projector, changing the DIP switch on a Mac adapter may bounce an image slightly or may display nothing. Should this happen, set the DIP switch to the 13" fixed mode and then restart your Mac. After that, restore the DIP switches to a displayable mode and then restart the Mac again.

  • Page 122: ❷ Specifications

    Compatible Signals* Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/UXGA/WSXGA+/HD/ Full HD/WUXGA/Mac13", 16", 21", 23" Component: 480i/480p/576i/576p/720p/1080i/1080p HDMI: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/WSXGA+/480p/576p/7 20p/1080i/1080p Horizontal Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60 300 TV lines: SECAM *5 HDMI (Deep Color, Lip Sync) with HDCP ® What is HDCP/HDCP technology? HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a High-Definition Multimedia Interface (HDMI). If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC). Video: Deep Color; 8/10/12-bit, LipSync Audio: LPCM; up to 2 ch, sample rate 32/44.1/48 KHz, sample bit; 16/20/24-bit *6 An image with higher or lower resolution than the projector’s native resolution (ME401X/ME361X/ME331X/ME301X: 1024 × 768 / ME401W/ME361W/ME331W/ME301W: 1280 × 800) will be displayed with Advanced AccuBlend. (→ page 115)
  • Page 123 8. Appendix Model Number ME401W ME361W ME331W ME301W ME401X ME361X ME331X ME301X Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) Vertical: 50 Hz to 120 Hz (HDMI: 50 Hz to 85 Hz) Sync Compatibility Separate Sync Built-in Speaker 20 W (monaural) Power Requirement 100–240V AC, 50/60Hz Input Current 3.4 A–1.4 A Power Con- ECO MODE 316 W 309 W 286 W 316 W 309 W 286 W sumption (100–130 V) (100–130 V) (100–130 V) (100–130 V) (100–130 V)

  • Page 124: ❸ Cabinet Dimensions

    8. Appendix ❸ Cabinet Dimensions Unit: mm (inch) 339 (13.3) 100 (3.9) 35.3 (1.4) 175 (6.9) Lens center 5 (0.2) 195 (7.7)

  • Page 125: ❹ Pin Assignments Of D-Sub Computer Input Terminal

    8. Appendix ❹ Pin Assignments of D-Sub COMPUTER Input Terminal Mini D-Sub 15 Pin Terminal Pin No. RGB Signal (Analog) YCbCr Signal 11 12 13 14 15 Green or Sync on Green Blue Ground Signal Level Ground Video signal : 0.7Vp-p (Analog) Red Ground Cr Ground Sync signal : TTL level Green Ground Y Ground Blue Ground Cb Ground Hotplug Sync Signal Ground No Connection Bi-directional DATA (SDA) Horizontal Sync or Composite Sync...

  • Page 126: ❺ Compatible Input Signal List

    Component SDTV(480i) 720 × 4:3/16:9 Refresh Rate SDTV(576i) 720 × 4:3/16:9 Signal Format Aspect Ratio ( Hz ) *1 Native resolution on XGA model (ME401X/ME361X/ME331X/ HDTV (1080p) 1920 × 1080 16:9 50/60 ME301X) HDTV (1080i) 1920 × 1080 16:9 50/60 *2 Native resolution on WXGA model (ME401W/ME361W/ME331W/ HDTV (720p) 1280 ×...

  • Page 127: ❻ Pc Control Codes And Cable Connection

    8. Appendix ❻ PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT VIDEO INPUT SELECT USB-A INPUT SELECT LAN INPUT SELECT USB-B PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON...

  • Page 128: ❼ Using The Computer Cable (Vga) To Operate The Projector (Virtual Remote Tool)

    8. Appendix ❼ Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) Using the utility software “Virtual Remote Tool” that is available to download from our web site, Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector’s power on or off and signal selection via the computer cable (VGA), serial cable, or LAN connection. Only via serial or LAN connection it is also used to send an image to the projector and register it as the logo data of the projector. After registering it, you can lock the logo to prevent it from changing. Control Functions Power On/Off, signal selection, picture freeze, picture mute, audio mute, Logo transfer to the projector, and remote control operation on your PC. Virtual Remote screen Toolbar For getting the Virtual Remote Tool, please visit our web site and download it: http://www.nec-display.com/dl/en/index.html...
  • Page 129 • To run Virtual Remote Tool on Windows 8.1, Windows 8 and Windows XP, “Microsoft .NET Framework Version 2.0” is required. The Microsoft .NET Framework Version 2.0, 3.0 or 3.5 is available from Microsoft’s web page. Download and install it on your computer. • Logo data (graphics) that can be sent to the projector with Virtual Remote Tool has the following restrictions: (Only via serial or LAN connection) - File size: Less than 1 MB - Image size (resolution): ME401W/ME361W/ME331W/ME301W: Horizontal 1280 × vertical 800 dots or less ME401X/ME361X/ME331X/ME301X: Horizontal 1024 × vertical 768 dots or less - Number of colors: 256 colors or less • To put the default "NEC logo" back in the background logo, you need to register it as the background logo by using the image file (ME401W/ME361W/ME331W/ME301W: /Logo/necpj_bbwx.bmp, ME401X/ME361X/ME331X/ME301X: /Logo/necpj_bb_x.bmp) inclulded on the supplied NEC Projector CD-ROM. TIP: • Virtual Remote Tool can be used with a LAN and a serial connection. USB connection is not supported by Virtual Remote Tool. • The projector’s COMPUTER IN terminal supports DDC/CI (Display Data Channel Command Interface). DDC/CI is a standard interface for bidirectional communication between display/projector and computer.

  • Page 130: ❽ Troubleshooting Check List

    8. Appendix ❽ Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check. Frequency of occurrence □ always □ sometimes (How often?_____________________) □ other (__________________) Power □ No power (POWER indicator does not light blue) See also “Status □ Shut down during operation� Indicator (STATUS)”�...
  • Page 131 Video adapter: Other: Projector Video equipment DVD player VCR, DVD player, Video camera, Video game or other Manufacturer: Signal cable Model number: NEC standard or other manufacturer’s cable? Model number: Length: inch/m Distribution amplifier Model number: Switcher Model number: Adapter Model number:...

  • Page 132: ❾ Register Your Projector! (For Residents In The United States, Canada, And Mexico)

    8. Appendix ❾ REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) Please take time to register your new projector. This will activate your limited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com, click on support center/register product and submit your completed form online. Upon receipt, we will send a confirmation letter with all the details you will need to take advantage of fast, reliable warranty and service programs from the industry leader, NEC Display Solutions of America, Inc.
  • Page 133 © NEC Display Solutions, Ltd. 2016 7N952531...

This manual is also suitable for:

Me361wMe361xMe301wMe331wMe331xMe301x ... Show all

Table of Contents