Unpack The Refractory & Fireplace - Heatilator I100 Installation Manual

D. Unpack the Refractory & Fireplace
• Remove back refractory from outside of fireplace by
bending tabs up and lifting refractory out of brackets.
See Figure 3.5.
• Bend tabs back down out of the way. See Figure 3.7.
• Do not remove screws or refractory brackets from
fireplace. If refractory brackets must be removed, fill
holes in outer shell with screws.
• Repeat this process to remove side refractories.
Figure 3.6 Unpack Back Refractory
Figure 3.7 Bend Refractory Brackets Back Down
• Remove screens by removing screw from end of each
screen rod.
Figure 3.8 Remove Screen Rods
Heatilator • ICON I100 • 4013-263 Installers Manual • Rev S • 11/22
• Remove hearth stone by removing three corrugated
shipping spacers (Figure 3.9). Lift hearth stone out of
fireplace. See Figure 3.10.
Figure 3.9 Shipping Spacers
Figure 3.10 Lifting Out Hearth Stone
• Remove fireplace from pallet:
- Remove screws from shipping brackets and pallet
(Figure 3.11),
- Replace screws removed from fireplace.
- Brackets can be used to anchor fireplace in position.
Figure 3.11 Removing Shipping Brackets
13