Husqvarna DE 110i H Operator's Manual page 15

3. Push on the lower part of the battery until you hear a
click.
4. Examine the battery lock indicator for correct battery
installation. This only applies for DE 120 H PACE.
1618 - 006 - 01.06.2023
5. Push the battery release buttons (A) and remove
the battery (B) from the battery holder to prevent
accidental start.
A
To start and stop
Note:
The suction is not at full capacity directly at
start, the suction operates fully after 5 seconds.
1. Install the battery. Refer to
battery on page 14 .
2. Push the On/Off button to start the product.
3. Select correct hose diameter. Refer to
hose nozzle diameter on page 14 .
4. To stop the product, push and hold the On/Off button
until the green LED light goes off.
5. Remove the battery from the battery holder. Refer to
To install and remove the battery on page 14 .
B
A
To install and remove the
To select the
15