Installing A Cpu Heatsink - Supermicro X13SAZ-F User Manual

Installing a CPU Heatsink

Note 1: The installation described in this section is for reference only. The actual
installation steps may vary depending on the CPU heatsink model. Please refer to the
heatsink instruction for more details.
Note 2: Graphic drawings included in this manual are for reference only. They might
look different from the components installed in your system.
1. Loosen four screws to release the backplate. Note that one screw is not shown in the
illustration below.
Backplate
2. If there is a thin layer of protective film on the backplate, please remove it.
Protective film
Heatsink
Unscrew
Backplate
top side
25
Chapter 2: Installation
Unscrew
Unscrew