Bissell PROHEAT 2X 8930 Series User Manual page 8

Hide thumbs Also See for PROHEAT 2X 8930 Series:
Table of Contents

Advertisement

Operations
notE: If your deep cleaner came with a
Deep Reach tool or Stain trapper tool,
do not follow cleaning instructions below.
Instead, follow instructions in next section.
7. Clean by pressing the trigger to spray solution
onto the area to be cleaned. slowly move the tool
back and forth over the soiled surface. Release
the trigger to suction soiled water. Continue to
clean in the area, working in small sections, until
no more dirt can be removed. Rinse (optional)
and suction as needed. Caution: Do no overwet.
8. Remove and rinse tools in clean, running
water. Dry and replace in the tool caddy.
9. it is recommended that you suction clean
water from a bowl to rinse out the hose.
10. before replacing lift end of hose and stretch
out to ensure all water is cleared from hose.
11. Wrap flex hose around the tool caddy.
12. empty 2-in-1 water tank and rinse out,
following the instructions on page 8.
13. Return ReadyTools dial to floor setting.
Deep Reach tool attachment
(Select models only)
1. Follow the instructions on page 7 for filling the
2-in-1 water tank and the formula tank.
2. Follow instructions 3-6 on page 9 under
"Cleaning with attachments".
3. set tool on stain and press the trigger to spray
solution onto the area to be cleaned.
4. slowly move the tool back and forth over the
soiled surface, keeping the tool in contact with
the carpet.
5. Release trigger and move tool slowly over the
soiled area to suction up water and dirt.
6. Continue to clean the area, working in small
sections, until no more dirt can be removed.
7. Remove tool from hose when finished. Clean
under warm water before storing.
Stain removal
Do Not Delay! Attending to an accident soon
after it occurs ensures the most optimal clean.
leaving it for an extended period of time may
cause it to set and become permanent.
1. blot up liquids with an absorbent cloth or
paper towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
www.bissell.com
10
800.237.7691
10.
3.
5.
7.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proheat 2x 9200 seriesProheat 2x 9300 series

Table of Contents